Welcome to RennTech.org Community, Guest
External Paint Colors
Porsche TSB Listings
Everything posted by doctorz1026
Video shows everything...
I pulled the large connector off of the Central Locking System module (under the driver's seat) and measured the discrete inputs for continuity to ground. For most of them, I could change the input by manipulating the device (like opening the center console). Everything seemed to work properly (see results below). I don't know how to test the interior motion sensor input since I can't set the alarm. I am still getting fault 34 "Interior sensor faulty" but I haven't found a faulty sensor. I also substituted another CLS module, DME module and key transponder but the symptoms remain the same
There are two rubber bushings that contain brass nuts used to hold down the covers on either side of the battery. The parts manual lists them as 999-500-092-00 and I just bought two of them from the local Porsche dealer. The problem is, they are not the same part as my 996 was built with. These new bushings do not fit properly in my car. I have an early 1999 996-C2 and Porsche must have changed the hole size and bushing after my car was built. Picture shows old on left and new on right. Does anyone have a reference for the old bushings?