Server Lease Renewal/Software Licenses
Our yearly server lease, software licenses, as well as hardware operating costs, ARE due Dec 6th, 2021. Our current donations have fallen far short of the funds we need to renew. Please remember the RennTech.org community is Member supported so please consider a donation to help... THANK YOU!
Welcome to RennTech.org Community, Guest
Hi I've just been checking over my roof as its become a bit slow/noisy opening and closing. Read though all the posts here and checked the cables etc and everything looks fine. I seem to have the newer cables with the re-inforced housing but also have the older red plastic balljoints. Nothing was broken and I checked the length of inner cable that was inside the motor and again plenty there. But I seem to have a problem with the clamshell cover being slightly offset to one side, which causes a slight problem when closing, leaving one side very slightly high and requires a gentle push to help it go flush. The offset is approx 2 - 3 mm and doesn't foul anything, it just causes the locating 'pegs' to bind slightly. I've tried gently 'persuading' the lid to no avail. I can't see anything that could be adjusted. Any body have any suggestions ? PS I'm sure this has only happened since the last service, when I also noticed a slight squeaking from the rear parcel shelf when driving. MY 2000 2.7 Speed Yellow UK