Jump to content

Welcome to RennTech.org Community, Guest

There are many great features available to you once you register at RennTech.org
You are free to view posts here, but you must log in to reply to existing posts, or to start your own new topic. Like most online communities, there are costs involved to maintain a site like this - so we encourage our members to donate. All donations go to the costs operating and maintaining this site. We prefer that guests take part in our community and we offer a lot in return to those willing to join our corner of the Porsche world. This site is 99 percent member supported (less than 1 percent comes from advertising) - so please consider an annual donation to keep this site running.

Here are some of the features available - once you register at RennTech.org

  • View Classified Ads
  • DIY Tutorials
  • Porsche TSB Listings (limited)
  • VIN Decoder
  • Special Offers
  • OBD II P-Codes
  • Paint Codes
  • Registry
  • Videos System
  • View Reviews
  • and get rid of this welcome message

It takes just a few minutes to register, and it's FREE

Contributing Members also get these additional benefits:
(you become a Contributing Member by donating money to the operation of this site)

  • No ads - advertisements are removed
  • Access the Contributors Only Forum
  • Contributing Members Only Downloads
  • Send attachments with PMs
  • All image/file storage limits are substantially increased for all Contributing Members
  • Option Codes Lookup
  • VIN Option Lookups (limited)

911nick

Members
  • Posts

    38
  • Joined

  • Last visited

Posts posted by 911nick

  1. While replacing the front struts, I accidentally punctured the front left inner cv joint boot. It's a small tear, but an amazing amount of grease has escaped it. I am thinking of buying a new boot kit. However, I really don't want to pull the whole axle. Do you think it would be possible to remove the inner flange bolts from the differential and pull back the axle enough to gain access to the cir clip, cv joint and boot? Anyone done this? Thanks  

     

    20180101_211410.jpg

  2. 9. Install strut assembly in reverse order. Torque spec for hub to ball joint upper control arm is 77 ft. lbs. Lower control arm to strut is 110 ft. lbs. + 90 degrees. I got these specs from a different forum. Be sure you pre-load the lower control arm to strut before tightening. I placed a jack under the joint and loaded the spring. Be careful as this will lift the vehicle off the jack stands. 

     

    Happy wrenching!

    • Upvote 1
  3. 6. Now, you are able to remove the strut assembly from the vehicle. Push the upper control arm up; this allows clearance for the strut to be removed. 

    7. Before you compress the springs, you must remove the bottom portion of the dust boot from the plastic ring. I did not take a photo of this. I used a pair of small pliers to carefully pry the bottom lip of the boot from the plastic ring. You will remove the plastic ring and attach it to the new strut. 

    8. Remove the sway bar link from the old strut. Note the position of the link before you do. You'll want to position the link on the new strut in the same position. 

     

    20170715_135532.jpg

  4. Front strut replacement completed!

     

    I'm happy to report that removing the strut assemblies from the Cayenne is mostly a straight forward job. 

     

    1. Raise the front of the vehicle so that both wheels are off the ground. Remove the wheels from the car. 

    2. Remove the the bolt that connects the sway bar drop link to the sway bar. Note: leave the drop link connected to the strut.

     

    20170715_125130.jpg

  5. When I did this procedure, I disconnected the return hose from the resevoir and aimed it down into a funnel that emptied into a catch basin. I also connected a temporary short hose to the resevoir that the return line normally connects. I aimed this hose up making it higher in elevation than the resevoir. This is what I chose to do in lieu of number 12 on the list that Loren provided.

  6. I definitely have all the tools. But, it seems to me that undoing the four bolts will release the strut coil assembly from the big bracket that is mounted to the chassis. Once the coil assembly is out, I would compress the spring and remove the spring nut, etc. Those four bolts do not hold tension on the coil. I really want to avoid having to remove more than I need. Hopefully removing those four nuts will be the only fasteners that need to be removed from the upper assembly. If so, the process will be almost as simple as the rear shock assemblies I replaced a few days ago. Does my logic sound correct?   

  7. I just took a look at the left side strut this morning. It looks like the regular coil spring assembly has four bolts that the air assembly does not have. Take a look at the photo. The green arrows point to three bolts. The fourth is out of view. It seems to me that I can undo those four nuts, and the coil assembly will fall away from the hat. I would have to remove the torsion bar and lower control arm bolts too obviously. What do you think?

     

     

    unnamed.jpg

  8. My Cayenne has the same issue. I checked all the obvious stuff, but eveything looks and works as it should. Finally, I took the car to an indy shop to see if it was a coding issue. They found a fault code and cleared it. For about a week after, the annoying dash warning was gone, but it started again. However, it is a lot less frequent. I am baffled by this one. OP, I'm sorry I don't have advice or a solution,  but my experience may help. 

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.