Server Lease Renewal/Software Licenses
Our yearly server lease, software licenses, as well as hardware operating costs, ARE due Dec 6th, 2021. Our current donations have fallen far short of the funds we need to renew. Please remember the RennTech.org community is Member supported so please consider a donation to help... THANK YOU!
Welcome to RennTech.org Community, Guest
Search the Community
Showing results for tags 'front'.
hello , i want to replace the brake pads on front and rear of my Cayenne 958 diesel 6/2012 Whit the black calipers , i have already order the parts , but i have some questions , The front calipers bolted whit to big bolts part number WHT 004 571 they told me to renew them to , but how tight do a have to fastened these bolts in newton . also the rear main caliper bolts needs to be replaced part number N 911 837 01 how tight must these ? but i cant find out how to chance those rear pads , the car have also electronic parking brakes but someone tels me that the car needs on the diagnose computer to chanche the rear pads (aka VW ) , but i find this strange , i tested wit a piece of paper between pad and disc and activate the parking brake result the paper was not holding tight between pad and disc and feld down. because of this i think there are internal brake shoes inside the disc is this correct ? any technical help whil be helpful thanks in advance . or any exploded view .pdf part numbers : front pads 958 351 939 , warn contact 958 612 356 00 , caliper clips 970 351 959 00 Bolt front caliper WHT 004 571 , Rear Pads 958 352 939 00 , bolt N 911 837 01 , caliper clips 7PP 615 269 , warn contact 958 612 365 50 see pictures
hey guys im having a some what of an issue with my c.s front wipers, they dont work. the front jets washer work so does the rear wipers. (1) i have checked all the fuses inside and in the engine bay (2) checked that the bonnet is closed cause i know it wont work if the bonnet is opened (3) using a snap on diagnostic tool i scanned the vehicle wiper module. no cummunication with the wiper ecu (4) checked the wiper motor connectors and wires theres 5 wires im getting earth and positive (5) i jumped the gun and bought a second hand wiper motor on ebay still no luck , theres possiblity that the motor i brought is faulty. does anybody have a wiring diagram for the wipers to the body control ecu or can help me with this issue
I need some help with this. I wanted to replace all 4 corners with EBC pads and rotors but what I found out is my car has 360mm rotors. There is a large selection of 350mm and 380mm rotors but the 360mm rotors are hard to come by in a aftermarket performance series brake rotor. Does anyone have any experience with this and what products did they wind up purchasing. Thank in advance for any suggestions
Hi All, Need your help again guys. I’ve got this weird problem whereby I am unable to open the front passenger side door (UK based car) using the external door handle. However I am able to open it using the interior handle. I’ve got access to an inspection camera which I was able to feed inside the door (after removing the grommet) and the main mechanism (supporting bow handle > http://www.design911.com/Supporting-Bow-Door-Handle-Porsche-955-Cayenne/prod7182/ ) appears to move freely when I pull either the interior or exterior door handles. This leads me to believe that it may be an electrical problem rather than mechanical? Thanks to this website I was able to find a guide on how to remove the interior door card (http://www.renntech.org/forums/topic/32744-door-panel-removal/ ) but before I attempt this I want to make sure that it’s not some thing simple or a setting that I’ve overlooked? Has anyone else experienced a similar problem and if so how did you resolve it? BTW I have a Key-less Entry System on my vehicle. Thanks in advance and I hope you can help me. AK
So, I replaced my GT3 front end after my GF had a bit of an off at a winter driving camp. Got everything back together except for the plug that goes in the center hole on the fender. The GT3 has an opening here for the center radiator. I haven't got a radiator there so I don't need the hole. The old part has this number: The dealer can't find this part and they even emailed Porsche in Germany that said this part-number isn't in their system... Any ideas?