Server Lease Renewal/Software Licenses
Our yearly server lease, software licenses, as well as hardware operating costs, ARE due Dec 6th, 2021. Our current donations have fallen far short of the funds we need to renew. Please remember the RennTech.org community is Member supported so please consider a donation to help... THANK YOU!
Welcome to RennTech.org Community, Guest
Search the Community
Showing results for tags 'latch'.
I just resolved a window issue on my 2007 Porsche Cayman and wanted to post and help out anyone with a similar issue. My passenger side window was functioning normally except for when I closed my door the automatic window drop to clear the door seal was not returning to the complete up position and was staying down. The automatic up feature on the window was also not working. The auto-down feature worked and all other functions of the window performed normally. So to be clear, when you pulled the exterior and interior door handles the widow dropped the 10mm or 1/4 inch it should. However, upon shutting the doot the window would stay down in this position and not return up. So.... I decided to do some research and came across the "latch micro switch issue".. I figured hey part isn't that expense so I replace the latch and the issue remained. After much more research, I came across a post about that issue being caused from a faulty door motor ECU. This IS the reason for the issue. After, disconnecting the battery, taking off the door panel using numerous videos and instructions from this site and others I was able to quickly replace the motor unit with a new one that I got on ebay for $120. The motor is easy to remove, 3 screws and then just pull the motor straight out and it will disconnect from the window regulator. Next, pop in the new one and you are good to go. Finally, the issue was resolved upon reconnecting the car battery and the motor auto cycled up and down and is now functioning normally. I wanted to post this as I am hoping someone else who does a google search for a similar issue will find this and save them hundreds if not a thousand dollars from taking the car to a Porsche dealer. The part number for the motor that I used to replace the current window motor was 997.624.182.06 replacing the original part that was 997.624.182.03
Hi Guys. I am new to the forum and proud new owner of a beautiful 06 Cayenne S. I love my new Porsche, but am slowly working on fixing a few minor issues... First of all, my driver door latch is defective or at least the switch in there is. The vehicle never knows when the driver door is open, no dome lights or door ajar switch or chime. I have already purchased a brand new replacement latch assembly. Any instructions or tutorials on the fastest and easiest way to replace this? Any help is greatly appreciated, thanks!
Hello everyone this is my first post, please be gentle:) And here I am desperate after about a days worth of trying to figure out the problem Cayman 2007. Basically the story is: The car battery was empty, to the point it did not start. I called the dealer, they picked up the car and they changed the battery. When i got the car back, when the passenger door opens the door goes down 10cm but when the door is closed it doesnt go up again. I called the dealer they put the car on the diagnostic and they told me that the problem is probably a vary small part on the locking mechanism of the door but they can only change the whole mechanism, quote $600. I said thank you and left. I assumed its the door latch microswith. So i took the door appart, check the microswitch on the door latch, it was working, I gave it a good clean anyway and i put it back, problem pressist. I though maybe its a problem with the connection inside the latch? Anyone knows the pinout of the latch so I can check without dissasembling it? Maybe its the main door connector? Anyone knows the pinout there? Anyone has any other ideas in general? Thank you from the lovely island of Cyprus, Yiangos
Does anyone know where I might find a used rear lid motor assembly. I think the worm drive in mine is stripped. It makes it's motor noise, but no movement. I've attached a pic showing unit (part#2). Thanks