Welcome to RennTech.org Community, Guest
Search the Community
Showing results for tags 'rebuild'.
Just wanted to say thanks to the community helped answer some questions about the scoring on my 2008 CTT 957. My next question is, does anyone know where I may purchase a complete engine seals and gasket kit for a 2008 Cayenne Turbo? Or if these are unavailable as a whole unit, had anyone rebuilt their engine from the cylinder scoring or something similar and have a parts list of required seals and gaskets which need changed? Additionally, are there any other suggestions on parts that I should change some I'll have the motor apart? Anything would help at this point. Thanks
Hi! After having searched online for days, devouring through the service manual and trying as many tricks I know, I come to this forum with great hope... I am in the middle of rebuilding a 987-1, M97 (3.4) engine that failed when a connecting rod bolt came loose. So far I have the bottom end put together with a brand new crankshaft, bearings, rod, rod bolts, etc. Now the issue that I have is that the primary chain won't sit flat on the teeth crankshaft. Due to which the IMS is being pulled up resulting in the cover not being able to be installed. I have attached some photos of w
Just posted a docu. on my completed 02 996 M96 3.6 l engine rebuild for a gorgeous C4 cab barn find, I bough back in August 17 as roller with complete engine (Head&Case failure). http://ow.ly/SjDf30fJkID It is not about performance upgrades or how it should be done. Is about the process to get it done with very details on the critical steps for the hands-on engineer. The car drives fantastic now, and if it breaks I will be confidently enough to spend the needed money and time to order on the new hard parts (Nickies, rods, heads, etc.... For now I did not spend a
I have the typical 2nd gear synchro issue on my 2000 Boxster S. When I bought it, I (regrettably) did not do a PII and overpaid too. Yes, I can analyze the things I SHOULD have done, but I am trying to look forward on how to get us much enjoyment out of my purchase. I have already done some work on it myself (water pump, radiator, short circuit repair, transmission fluid, oil and filter) which chewed further into the $$$. The only nagging issue that I am now aware of is this 2nd gear grinding. I have figured out that I can double-clutch (up) into 2nd without the grind. However, that do