Jump to content

The RennTech.org community is Member supported!  Please consider an ANNUAL donation to help keep this site operating.
Click here to Donate

Welcome to RennTech.org Community, Guest

There are many great features available to you once you register at RennTech.org
You are free to view posts here, but you must log in to reply to existing posts, or to start your own new topic. Like most online communities, there are costs involved to maintain a site like this - so we encourage our members to donate. All donations go to the costs operating and maintaining this site. We prefer that guests take part in our community and we offer a lot in return to those willing to join our corner of the Porsche world. This site is 99 percent member supported (less than 1 percent comes from advertising) - so please consider an annual donation to keep this site running.

Here are some of the features available - once you register at RennTech.org

  • View Classified Ads
  • DIY Tutorials
  • Porsche TSB Listings (limited)
  • VIN Decoder
  • Special Offers
  • OBD II P-Codes
  • Paint Codes
  • Registry
  • Videos System
  • View Reviews
  • and get rid of this welcome message

It takes just a few minutes to register, and it's FREE

Contributing Members also get these additional benefits:
(you become a Contributing Member by donating money to the operation of this site)

  • No ads - advertisements are removed
  • Access the Contributors Only Forum
  • Contributing Members Only Downloads
  • Send attachments with PMs
  • All image/file storage limits are substantially increased for all Contributing Members
  • Option Codes Lookup
  • VIN Option Lookups (limited)
evansaero

Adjusting parking brake

Recommended Posts

    You can remove these ads by becoming a Contributing Member.

There are two adjustments - at the wheels and at the handbrake handle itself.

To adjust:

1. Remove the rear wheels.

2. Release the parking brake lever and push back the brake pads of the rear axle until the brake disc can be turned freely.

3. Undo the adjustment nuts on the turnbuckle (arrow) until the cables are without pretension.

post-2-1158267824.png

4. With a screwdriver, adjust the adjustment fixture through a threaded wheel bolt hole until the wheel can no longer be turned. Next, turn back the adjustment fixture through 5 notches again (release approx. 3 notches until the wheel can be turned freely, then release another 2 notches).

Repeat the procedure on the other wheel.

post-2-1158267841.png

5. Pull up the parking brake lever by 2 teeth and turn the adjustment nut of the turnbuckle until both wheels can be turned manually with difficulty.

6. Release the parking brake lever and check whether both wheels can be turned freely.

Share this post


Link to post
Share on other sites

Loren: I understood that the handbrake was a separate drum brake inside the rear wheel hubs. From your description it appears that applying the handbrake does indeed grab the rear disks. If that is the case I would be against leaving the haandbrake applied, when the car is on a level surface, if at all possible. I do not like to put a force on the rear calipers over a hot disk and let it cool that way.

Edited by ADias

Share this post


Link to post
Share on other sites

It is pretty easy. I just did it last weekend. I don't think they were ever adjusted since new. I had to turn each adjuster 3-4 full turns to get to where they start dragging.

Share this post


Link to post
Share on other sites

I know this is an old thread but could I get some quick advice? Car is a 99 996 C2 3.4 U.S. My parking brake is way out. So I don't have to take off the rotor, which way do you turn the adjusting nut in the hub to tighten the brake shoe. I know this sounds stupid but I don't want to get it too far out. Thanks. For instance, on the drivers side.

Share this post


Link to post
Share on other sites

Don't remember. I was hurting too much lying on the concrete with a screwdriver and a flashlight. I know it doesn't take many turns to find the limit either way. One or two flats can make the difference. Sorry, Robert.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.