Jump to content

Server Lease Renewal/Software Licenses

Our yearly server lease, software licenses, as well as hardware operating costs, ARE due Dec 6th, 2021. Our current donations have fallen far short of the funds we need to renew. Please remember the RennTech.org community is Member supported so please consider a donation to help...  THANK YOU!

Welcome to RennTech.org Community, Guest

There are many great features available to you once you register at RennTech.org
You are free to view posts here, but you must log in to reply to existing posts, or to start your own new topic. Like most online communities, there are costs involved to maintain a site like this - so we encourage our members to donate. All donations go to the costs operating and maintaining this site. We prefer that guests take part in our community and we offer a lot in return to those willing to join our corner of the Porsche world. This site is 99 percent member supported (less than 1 percent comes from advertising) - so please consider an annual donation to keep this site running.

Here are some of the features available - once you register at RennTech.org

  • View Classified Ads
  • DIY Tutorials
  • Porsche TSB Listings (limited)
  • VIN Decoder
  • Special Offers
  • OBD II P-Codes
  • Paint Codes
  • Registry
  • Videos System
  • View Reviews
  • and get rid of this welcome message

It takes just a few minutes to register, and it's FREE

Contributing Members also get these additional benefits:
(you become a Contributing Member by donating money to the operation of this site)

  • No ads - advertisements are removed
  • Access the Contributors Only Forum
  • Contributing Members Only Downloads
  • Send attachments with PMs
  • All image/file storage limits are substantially increased for all Contributing Members
  • Option Codes Lookup
  • VIN Option Lookups (limited)

Car Will Not Start :(


Recommended Posts

:help: Any ideas from the group? Battery is fine with 12 volts, I get all lights when key is turned, I can hear the clutch switch clicking when I depress the clutch. I changed the ignition switch in Sept. I tried both keys and it would not start (thinking low battery's in the key for alarm) Can any of you think of anything else I am forgetting or should try???

Thanks in advance.

Link to comment
Share on other sites

I have no idea if this applies to 996's but, I know you're desperate so I'll try to help. On many cars with these symptons, one of the wires that goes to the starter occasionally has a bad electrical connection/contact. Usually, you look for the starter (in the engine compartment), and wiggle the wire(s) that is connected to it. This will help the electrical connection/contact. You can also remove the wire (it should be very easy) and examine the contact and maybe use some sandpaper on the male end to help it make a better contact when it's reconnected if it's dirty or corroded.

b-man

Edited by b-man
Link to comment
Share on other sites

I tried bypassing the clutch switch with no success. I have all my tools in storage because our new house is not done yet.... figures. I will be towing it to a shop in the AM.

Thanks

Edited by C.Plavan
Link to comment
Share on other sites

  • Moderators

I believe that there is transceiver in/near the ignition switch that "talks" to the coded chip in each key head. The drive block has to be programmed by the PST2 to recognize each separate key head. Could changing the ignition switch have messed with the transceiver?

Link to comment
Share on other sites

It was the immobilizer that took a crap with only 33K miles on the clock. The shop says they have replaced 3 others. They hooked it up to the computer and it didn't even recognize the immobilizer. There goes $300 to $400 on a crappy Porsche part that will fail again in the next few years. Not to mention the pain in dealing with Porsche to get the new codes for the new immobilizer.

Link to comment
Share on other sites

  • Moderators

There is a Boxster guy I have tried to help with the same problem. His unit shorted out due to water.

When you replace the control unit the PST2 can read out the codes for the remote keys and then the code can be inputed/transfered into the new unit and that way you do not have to replace the remotes.

But if the PST2 cannot even recognize the unit..... Same problem with the Boxster guy.

Were you given the paper tag for the remotes when you bought the car? It has a bar code on it with a 24 digit code.

I know a guy with 2 new remotes with the paper tags who wants to sell them - but they are for a Boxster.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.