Jump to content

Server Lease Renewal/Software Licenses

Our yearly server lease, software licenses, as well as hardware operating costs, ARE due Dec 6th, 2021. Our current donations have fallen far short of the funds we need to renew. Please remember the RennTech.org community is Member supported so please consider a donation to help...  THANK YOU!

Welcome to RennTech.org Community, Guest

There are many great features available to you once you register at RennTech.org
You are free to view posts here, but you must log in to reply to existing posts, or to start your own new topic. Like most online communities, there are costs involved to maintain a site like this - so we encourage our members to donate. All donations go to the costs operating and maintaining this site. We prefer that guests take part in our community and we offer a lot in return to those willing to join our corner of the Porsche world. This site is 99 percent member supported (less than 1 percent comes from advertising) - so please consider an annual donation to keep this site running.

Here are some of the features available - once you register at RennTech.org

  • View Classified Ads
  • DIY Tutorials
  • Porsche TSB Listings (limited)
  • VIN Decoder
  • Special Offers
  • OBD II P-Codes
  • Paint Codes
  • Registry
  • Videos System
  • View Reviews
  • and get rid of this welcome message

It takes just a few minutes to register, and it's FREE

Contributing Members also get these additional benefits:
(you become a Contributing Member by donating money to the operation of this site)

  • No ads - advertisements are removed
  • Access the Contributors Only Forum
  • Contributing Members Only Downloads
  • Send attachments with PMs
  • All image/file storage limits are substantially increased for all Contributing Members
  • Option Codes Lookup
  • VIN Option Lookups (limited)

Recommended Posts

I am changing the front shocks on my 2006 997-1 C4S. does anyone know if there is a good DIY that I can follow somewhere? I am basically wondering what needs to be removed in terms of other parts to get the job done, such as calipers and rotors? any advice is obviously apreciated! Also, if there is anything that I should be looking out for kindly let me know!

Cheers,

Bianx

Link to comment
Share on other sites

Hi Paul,

thanks for this. although the link is to an older porsche suspension set up that I cannot really relate to, i'll try searching in the 996 section as I imagine that the 996 and 997 set ups are closer if not the same.

Bianx

Link to comment
Share on other sites

OK so just had a go and unfortunately failed..

I jacked the car, removed wheel, removed caliper and rotor, removed any of the smaller pieces connected to the strut, removed the three nuts at the top of the strut and removed the ABS and brake lines out of the way.

Problem was that I would not remove the strut (whole assembled mcpherson strut) from the wheel arch. I managed to push the strut down so that the three bolts at the top of the strut came through into the wheel arch area, however I could not go down much more. What is the part that support the lower part of the strut called? is that meant to be disassembled too? Is the spring meant to be compressed in order to remove it from the arch? I tried to compress it however it is not easy as it is conical shaped and just about has three coils that can be 'grabbed' by the compressor on one side, and two on the other. Definitely not enough to get it out of the arch. I am obviously missing something basic here and i cannot put my finger on it.

I would really appreciate some help with this. I am not sure whether it makes a difference but it is a 4S so the front wheels are driven. I do not know if this changes anything with the strut removal.

Thanks again for any help!

Link to comment
Share on other sites

Just a thought. Is it necessary to remove the wheel carrier in order to remove the complete strut from the wheel well? By doing so, the strut would fall vertically downwards and come out of the wheel well without any problems.

I cannot seem to find the solution to this problem which I imagine is a very obvious one!

Paulspeed, thanks for your instructions however it is point 10 that I am getting struck on...

Link to comment
Share on other sites

  • 6 years later...

Old thread but yes according to my tech at PPP Dallas with 20 yrs there says the axles come out as well f& r. That allows the unit to drop together once free of bolts. This was confirmed today. One reason to let a pro do an AWD car OR replace LCAs same time. Prying on LCAs will destroy older bushings I surmise so easier to remove axles. They charge 8hrs labor on my c4.

Edited by ALEV8
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.