Jump to content

Welcome to RennTech.org Community, Guest

There are many great features available to you once you register at RennTech.org
You are free to view posts here, but you must log in to reply to existing posts, or to start your own new topic. Like most online communities, there are costs involved to maintain a site like this - so we encourage our members to donate. All donations go to the costs operating and maintaining this site. We prefer that guests take part in our community and we offer a lot in return to those willing to join our corner of the Porsche world. This site is 99 percent member supported (less than 1 percent comes from advertising) - so please consider an annual donation to keep this site running.

Here are some of the features available - once you register at RennTech.org

  • View Classified Ads
  • DIY Tutorials
  • Porsche TSB Listings (limited)
  • VIN Decoder
  • Special Offers
  • OBD II P-Codes
  • Paint Codes
  • Registry
  • Videos System
  • View Reviews
  • and get rid of this welcome message

It takes just a few minutes to register, and it's FREE

Contributing Members also get these additional benefits:
(you become a Contributing Member by donating money to the operation of this site)

  • No ads - advertisements are removed
  • Access the Contributors Only Forum
  • Contributing Members Only Downloads
  • Send attachments with PMs
  • All image/file storage limits are substantially increased for all Contributing Members
  • Option Codes Lookup
  • VIN Option Lookups (limited)
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By 318touring
      X-posting from other forums as this seems to be a rare issue? 
       
      Car is 2010, C2, PDK
       
      Has anyone had this issue? 
       
      I have read a post or two where people were just leaving things be. 
       
      Would appreciate getting any feedback on what could be the cause. I have checked the power steering fluid, and it was full. 
       
      The video is of the rack itself. 
       
       
       
      Thanks!
    • By bowtie
      I have a big issue with my roof and windows at my 2007 2.7 987 Boxster
      unfortunately most information I can find is for 986.
      The roof is mecanical closed but electronic say "open" and the windows remain in "roof operation position" 4cm down
      Roof is not moving anymore...
      The relays S3 and S5 are already checked...so next step in the root cause analysis...
       
      The roof motor has 2 wires. green and black.
      How many sensors /microswitches are in the 987?
      I can only find one, at the top.
       
      Can anybody support with wiring diagram?
       
    • By jgiles_2
      Hi all
      My 2002 996 coupe has a squeaking passenger seat when I push/pull the top or back part of the seat, including driving over bumps.  I have half powered seats,,, the top/back is powered while the lower seat assembly is manual.  The squeak happens when the top/back is in any position including up so you can access the back seats.
       
      Something must be loose, but my question is if there are any DIY instructions that I could focus on instead of trying to tighten every bolt and hex screw that I can access.  It's pretty compact down there...
       
      Appreciated... 
       
      Thank you in advance
    • By dammad
      Am I unlucky.. :huh:  Seems that after fixing my oil level sensor, I've found that the coolant pump squeaks when the car warms up. I've localized the noise to the pump rather than the idler pulley so it is looking like I'm going to have to get it replaced. 56k miles seems awfully early for the water pump to die.  :censored:  Has anyone seen Porsche fix these outside of warranty (or discount?)?
       
      Alternatively, does anyone have any experience with the DIY replacement? I've done it on my 996 (1999) so am wondering if it is more or less difficult? I've read that it is supposed to be more accessible, but the workshop manual seems to indicate removing the entire engine carrier plate on the rear of the engine.
       
      :help:
    • By rennbod
      I committed the fatal sin with my Boxster and did not clean out the drains since this time last year and was punished by the drains clogging up and flooding the interior of the car.
      The result was a very wet body control unit, all the rear lights illuminated and once I got into the car it decided to start moving the roof on its own and broke the plastic ball ends off two of the roof (soft top) arms on the roof transmissions....
      So, as I have a durametric, I decided to buy a new body control unit, and coded it up as best as I can and replaced both the arms with the plastic ball ends.
      Everything seems to be fine and working great, except for one, minor and confusing feature.. The clam shell at the back of the roof comes down properly when you put the roof down, but does not come down completely when you put the roof up!
      I have tried adjusting everything which can be adjusted, I have spent days going through the forums searching for a similar problem, and I have even taken the roof transmissions off and inspected them and figured out how they work.
      The transmissions run until they hit the two microswitches inside the transmissions, which also seem to be working properly
      Nothing seems bent, other than the ends of the rods going to the clamshell, which seem to be bent from the factory.
      On my old boxster (986) I once had a problem getting the roof to work properly and noticed on that on that car when the roof was all the way forward, a microswitch above the door pillar would be made and then the roof seemed to run for a couple more seconds to finish closing things and put everything under tension, on this 987 the motors stop the instant they hit the microswitches in the transmissions,,, Is this right?
      The other odd thing, the durametric seems to be able to code the rear control unit, and I can change coding and see the effects, but if I try to read or clear fault codes in the rear unit it just sits there forever trying to connect... Is this normal, or an indication of a seperate or connected fault? Occasionally the Gateway and other systems are reporting being unable to communicate with the rear control unit also... Which is odd.. How can I be coding it via its communication system, but not able to talk to it for fault codes?
      Anyway, I would have put up two problems here seperately (Clamshell not closing and communication errors) but thought it might be best to give you guys the full picture!
      ... HELP!!!
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.