Welcome to RennTech.org Community, Guest
Hi Porsche people
I changed the spark plugs of my 955 CTT yesterday and I think the plug on cylinder 6 is not as the others. For me it does not show a realy scary image,
and I'm sure it is not urgent but can you see something more?
2002 911 C2 Coupe
I'm having the classic misfire on cylinder 1 when the car is wet. I used contact cleaner on the ignition wire plug into the coil and it works fine for now. I/m sure when it gets rained on it will misfire again. Already replaced spark plugs. I discovered there is a tear in the little orange gasket (green arrow in photo) on the ignition wire connector and water is getting in there when it rains. Anybody know where I can find a replacement without buying a new $812 engine wiring harness?
Just found some instructions for changing spark plugs without having to remove the rear bumper/license plate light, and intercoolers.
The process is more or less - remove rear wheels, and then remove various heat shields - does this seem viable?
Here is the link I found: http://bd8ba3c866c8cbc330ab-7b26c6f3e01bf511d4da3315c66902d6.r6.cf1.rackcdn.com/Porsche996TMajorMaintenanceupdate.pdf
Using this method will save a bunch of time
let me know,