Jump to content

The RennTech.org community is Member supported!  Please consider an ANNUAL donation to help keep this site operating.
Click here to Donate

Welcome to RennTech.org Community, Guest

There are many great features available to you once you register at RennTech.org
You are free to view posts here, but you must log in to reply to existing posts, or to start your own new topic. Like most online communities, there are costs involved to maintain a site like this - so we encourage our members to donate. All donations go to the costs operating and maintaining this site. We prefer that guests take part in our community and we offer a lot in return to those willing to join our corner of the Porsche world. This site is 99 percent member supported (less than 1 percent comes from advertising) - so please consider an annual donation to keep this site running.

Here are some of the features available - once you register at RennTech.org

  • View Classified Ads
  • DIY Tutorials
  • Porsche TSB Listings (limited)
  • VIN Decoder
  • Special Offers
  • OBD II P-Codes
  • Paint Codes
  • Registry
  • Videos System
  • View Reviews
  • and get rid of this welcome message

It takes just a few minutes to register, and it's FREE

Contributing Members also get these additional benefits:
(you become a Contributing Member by donating money to the operation of this site)

  • No ads - advertisements are removed
  • Access the Contributors Only Forum
  • Contributing Members Only Downloads
  • Send attachments with PMs
  • All image/file storage limits are substantially increased for all Contributing Members
  • Option Codes Lookup
  • VIN Option Lookups (limited)
Sign in to follow this  
jfoxny

Removing an aftermarket satellite radio

Recommended Posts

I am buying a 997.1 that has an aftermarket sat radio installed which I would like to remove - hate the look, don't use sat radio and my knee bumps up against it. It was installed on a metal bracket that was screwed in underneath the dash. So, that part seems simple; just unscrew it. However, the antenna pops out where the window meets the dash and I'm not sure how they got it there.

I am not a car stereo buff and I have no idea what's involved in uninstalling this setup. Do you have to remove the dash to get rid of this thing or just pull out the PCM head unit or can I just unscrew the mount, cut the wires and pull (probably a bad idea :-P)?

If anyone has dealt with this before and could provide some insight it would be much appreciated.

Thanks in advance.

Jason

Quote

Edited by jfoxny

Share this post


Link to post
Share on other sites
    You can remove these ads by becoming a Contributing Member.

I removed a Kenwood Sirius satellite radio receiver installed by the prior owner. I found that the Kenwood box tapped into the existing am/fm antenna cable behind the PCM. It fed the satellite radio signal into the factory system in that manner because there were no auxilliary inputs on the factory radio. The factory unit antenna had a male/female coupling - so it was simple to remove the "Y" tap and just reconnect the factory am/fm antenna without the tap. If yours is similar, you will have to remove the two side panels from your front console, then look for the black coaxial antenna cable. You should find a Y-connector, which you will simply unplug and then reconnect the standard antenna cable. No cutting is involved. Then, try to trace the others wires from the satellite radio (power, ground, infrared remote, etc.). You can either disconnect them (best) or cut them and tape the ends. After I removed the satellite radio, my AM/FM radio signal improved noticeably.

And, like yours, the Kenwood box had a little Sirius antenna stuck on the dash that was connected back to the box by a thin wire. I cut the thin wire and pulled it out.

Share this post


Link to post
Share on other sites

Stuck on the dash - Tacky !!!!

Mine is stuck to top corner of Pass side window on the inside with the cable hidden inside the A pillar. It is hardly noticable so will leave it there pending a Sat upgrade. I already found the other end of the antenna neatly tie wrapped and tucked up on the inside of pass foot well.

At least I assume it is Sat antenna as there is nothing else left of the install other than power tap to the Phone plug and some miscellaneous velcro which is thankfully out of site. I already pulled my radio hoping it had a T connection on the antenna but it did not. Perhaps PO used a FM xmitter instead.

Share this post


Link to post
Share on other sites
Stuck on the dash - Tacky !!!!

Actually, the antenna was stuck on the hard-plastic part of the dash near the windscreen, the unit was mounted on a bracket SCREWED into the underside of the driver's side footwell. I ended up removing the bracket myself (leaving the screws in the holes) and then had the dealer do the rest. Though, I think the dealer just cut the wires anyways. Goo Gone worked wonders on the sticky stuff, by the way.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.