Welcome to RennTech.org Community, Guest
I got my 2014 Cayenne Platinum edition and it seems that the remote unlock and locking mechanism using my key fob does not work unless i am close to the vehicle, range is i would say 5 feet.
I tried to change the batteries on the key fob but issue still there, is there anything else i am missing or is it a design issue by Porsche that they corrected on a later versions ?
I was checking / fixing fuses, pulling them and putting new that kind of stuff and now my windows do not open and the front light are always on! The fuses are ok but I am wondering if by playing around maybe i messed up a relay or something! I tried to fix the fuses to what they should be, in the past the car ( used ) had fuses too big for what the chart called for, so for example i replaced a 30 for a 10 if a 10 was the one needed etc.
having some issues with locking my cs using the key fob , i can unlock the car fine with the fob but i have to be next to drivers glass to lock the car . i have changed the battery in the fob no luck
the led on the fob goes off when i press the lock button , i have also tried resync the key . has anybody had this similar fault
Troubleshooting a no crank issue; this code came up on the durametric alarm module section.
My alldata documentation goes on to state;
What does this even mean ? An entirely defective door lock module ? Did a previous owner install one from another car ? I don't really understand because the troubleshooting step is just one possible simple solution.
I will carefully test all operation of the door lock and update with another post.