Jump to content

Welcome to RennTech.org Community, Guest

There are many great features available to you once you register at RennTech.org
You are free to view posts here, but you must log in to reply to existing posts, or to start your own new topic. Like most online communities, there are costs involved to maintain a site like this - so we encourage our members to donate. All donations go to the costs operating and maintaining this site. We prefer that guests take part in our community and we offer a lot in return to those willing to join our corner of the Porsche world. This site is 99 percent member supported (less than 1 percent comes from advertising) - so please consider an annual donation to keep this site running.

Here are some of the features available - once you register at RennTech.org

  • View Classified Ads
  • DIY Tutorials
  • Porsche TSB Listings (limited)
  • VIN Decoder
  • Special Offers
  • OBD II P-Codes
  • Paint Codes
  • Registry
  • Videos System
  • View Reviews
  • and get rid of this welcome message

It takes just a few minutes to register, and it's FREE

Contributing Members also get these additional benefits:
(you become a Contributing Member by donating money to the operation of this site)

  • No ads - advertisements are removed
  • Access the Contributors Only Forum
  • Contributing Members Only Downloads
  • Send attachments with PMs
  • All image/file storage limits are substantially increased for all Contributing Members
  • Option Codes Lookup
  • VIN Option Lookups (limited)

Recommended Posts

Hey all, I have an intermittent issue with a convertible top on a 2003 Boxster. After the car has sat for over a week the convertible top won't go up or down via the switch on the dash.

Thanks to the great advice on these forums I was able to eliminate a lot of potential problems (parking break dash light, micro switches, blown fuses). Then I came to some suggestions involving the relay panel and, sure enough, if I pull a relay and put it back in, the convertible top switch on the dash works again.

What I can't figure out is why this works. It seems like I'm pulling the wrong relay? I 'borrowed' this pic from another thread because the relay panel looks the same as mine. Everything I've been reading says that the convertible top relay is the long rectangular white box. However, when I pull the smaller white box to the right of it and put it back in, the one with the blue sides (see pic below), the top works again.

relay_flasher.jpg

In case anyone can't see it from the above, here's another pic... The relay I pull to get the top to work again is the one to the right of the yellow outline:

relay_location.jpg

Does anyone know why the top works by pulling the wrong box, to the right of what should be the convertible top relay? What is this relay, and if I replace it would it alleviate the issue?

Share this post


Link to post
Share on other sites
    You can remove these ads by becoming a Contributing Member.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By crwarren11
      Hi all,
      Over the past 6 months I have now broken 3 convertible top transmission cables (i.e. motor-to-transmission p/n 986 561 717 03).  This is after not breaking any of these cables for the first 19 years of the life of the car.  I believe what is happening is that the motor is being allowed to run too far past the fully open and closed positions (seems most likely the top-closed position as the breaks have occurred 3 of 3 times when the top is closed or closing).   After reading many of the posts about the microswitches that control the power to the convertible top motor, I believe this is likely my root cause.  However, I am unclear which switches I need to check for my model year (2000).  I understand that I have the later-version transmissions which have a switch inside the transmission case and I confirm that this is the model that I have.  I thought this was the switch that controlled power to the motor and to turn off the dash light. But I am not sure if I also have the switch in the B pillar (986 613 767 01) and/or the switch in the roof (986 613 101 02), or if/how these switches control power to the convertible top motor.
       
      Many thanks for any guidance you can provide!
       
    • By tony z
      Hi
       
      Can loctite or a similar  compound be used on bolts 9921800501 and 90007548601.....I have been told Loctite 243 or 260 is suitable but I just wanted to check.
       
      thanks
    • By StevieG
      Hi Porsche Gurus
      I’m trying to troubleshoot a little issue I have that just my drivers door courtesy lights (and drivers sunvisor light but not sure if that’s different issue) don’t work, both the red and white ones and only the one door(rhd car) 
      now ive checked the common things like all the fuses and the wiring to see if they were damaged or corroded but they seem fine,
      The one thing I would like to check but can not find any info on is where or what is the switch or sensor that tells the lights that the door is open to turn the lights on? 
      If I can find that then that will at least eliminate all manual fixes that I can think of unless any of you have come across this before, if it’s something simple and I look like a fool for not thinking of it then I’m happy to be a fool as long as the lights work:)
      any help would be much appreciated 
      thanks 
      Stevie G 
    • By Toyguy
      I just bought myself my first Porsche, a 1998 Boxster.  I have an issue with the soft top that I'd like to get some guidance on.
       
      The top goes down smoothly with no issues.  It also comes up smoothly until it is nearly all the way up.  Just before the dashboard Top light goes out, there is a pretty sharp metallic twang or snap.  It did this when I was looking at the car before purchase, and it did it again this evening when I put the top up after driving the car home.  I'm assuming it's getting caught on something but I wonder if anyone might have suggestions on what to look at given the late point in the cycle where it occurs?
       
      Thanks!
      Dave
    • By Awamlehmain
      Hey everyone, i own a 2010 porsche Boxter 2.9L with the PDK transmission.. yesterday after leaving the car for a 4 days i started it and went for a drive.. when i turned it on again, i got a warning message “emergency transmission run” and the car became very jerky through gearshifts and wouldnt accelerate properly.. after turning it on and off the message went away and it drove just fine but then it kept re-appearing mid drives and becomes very jerky and clunky...ive noticed since i had the car that the gearbox was sometimes clunky or would make a noise when changing gear but the dealership said that was fine and normal since its a PDK, the car is at 59,000km so its time for a transmission fluid change... could this be a low voltage problem, or transmission fluid? The reverse gear works just fine.. has this happened to any other owners?
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.