Welcome to RennTech.org Community, Guest
There are many great features available to you once you register at RennTech.org
You are free to view posts here, but you must log in to reply to existing posts, or to start your own new topic. Like most online communities, there are costs involved to maintain a site like this - so we encourage our members to donate. All donations go to the costs operating and maintaining this site. We prefer that guests take part in our community and we offer a lot in return to those willing to join our corner of the Porsche world. This site is 99 percent member supported (less than 1 percent comes from advertising) - so please consider an annual donation to keep this site running.
Here are some of the features available - once you register at RennTech.org
- View Classified Ads
- DIY Tutorials
- Porsche TSB Listings (limited)
- VIN Decoder
- Special Offers
OBD II P-Codes
- Paint Codes
- Videos System
- View Reviews
- and get rid of this welcome message
It takes just a few minutes to register, and it's FREE
Contributing Members also get these additional benefits:
(you become a Contributing Member by donating money to the operation of this site)
- No ads - advertisements are removed
- Access the Contributors Only Forum
- Contributing Members Only Downloads
- Send attachments with PMs
- All image/file storage limits are substantially increased for all Contributing Members
- Option Codes Lookup
- VIN Option Lookups (limited)
By ECU Doctors
As some of you may already know, we talked about designing a waterproof case for the Alarm Immobilizer Unit in Boxsters and 996s.
These units get water damaged easily if the convertible top is left open during rain, or just by the accumulation of water by the car's water drains, because Porsche installed them right on the floor of the car.
The costs entailed to repair this problem can reach $1,000's easily, that's why it would be more cost effectuve to protect the CLU to begin with.
Therefore, after many months of revisions and working with vendors to complete this enclosure, we began shipping waterproof cases last week to the members that where on our waiting list.
Below are a few screenshots of the installation video final Immobilizer Waterproof case.
If you are curious about how it is mounted here is the installation video: and PDF instructions: http://goo.gl/A9NQou
We're excited about this project and what it could mean to the Porsche community.
Please share if you know someone that could benefit from this.
I have had a good run with my 986 and no problems for a good while, but nothing lasts forever...
In the last month the car will randomly stall and refuse to start back up for an undefined period of time. When it happens all the lights on the dash will flash on as if the key has just been turned to the on position. The starter will crank the engine happily but there is no ignition happening. This will last for an unknown amount of time (20 min or a day) and then the car will start right up again. Only to stall out later at some unknown point. (15 min or 1 hour). I have hooked the durametric up to it each time and got nothing, except the last time. P1571 fault 39, pointing to the immobilizer. After searching I came upon this thread from 2009, that describes exactly what I am experiencing, but a solution was never posted.
So to get down to point, I have a few trouble shooting questions and steps I will take next;
1.) The ignition switch has been giving me the traditional issues and it probably needs to be replaced (again). If the electronics in the plastic switch are going bad, could they cause this? Engine stall, clean crank with no start-up?
2.) could the P1571 be attributed to a freak accident during the stall that confused the car since I never got this error before? After I cleared it and cranked it with no start, there were no new fault codes.
3.) Im reading conflicting info on crank position sensors. Will they relay a fault code, or not?
4.) I have tried both keys, ruling out a bad key transmitter.
5.) I will check the immobilizer under the seat, but don't expect any water damage.
6.) I will check all the relays.
Sorry for the long winded explanation. If anyone has a history with this, or any insight to #1,#2, or #3, please share.
I brought my car into the shop when it wouldn't start in my garage. The instrument cluster lit up but the engine wouldn't turn, nor would my radio turn on. The top worked as normal, as did my door locks.
The car has been in a small import garage for 3 WEEKS now, and they claim they've ruled out the obvious, clutch safety switch, etc. but don't have the staff nor some of the equipment to peel the error codes off the computer to definitvely say the immobilizer is gone.
The only positive is that they would put in a used immobilizer if I needed one. If I did that, would the new keys also open the doors/trunk or would I need to put in new tumblers?
Has anyone actually replaced the front sunroof drains on a Cayenne? I've got a 2003 Turbo and like many of us, have had a clogged sunroof drain and a lake underneath the front carpet. I removed the front seat and peeled the carpet and foam back and let it sit in the sun for a few days and it finally dried out.
When i started inspecting the drain, i noticed that mine has a flattened area where it turns downward from underneath the headliner to down the A-pillar. It's still clogged at the end, but i need to replace it because it is too stiff to return to its original round shape.
Where do the drains actually exit? I removed the wheel well and i see one drain that i can stick my finger, but i believe this is the cowl drain based on other photos. Does anyone have photos depicting the different drain locations (i.e. cowl, AC evaporator, sunroof drains).
I've read a lot of the forums about cleaning the drains, but haven't seen any dealing with replacement.
Any help would be much appreciated!
My key remotes no longer work. I can only (un)lock the car at the door with the key. The car isn't in energy saving mode and the batteries are new. I performed the resynchronization as noted in the factory service manual (turn ignition on, turn ignition off, remove key and press unlock button within 6 seconds); however, that didn't do anything.
It's worth noting that I think the remote on one of my keys is broken, since the LED only flashes once/second and when I release the button, the LED glows dimly. But, my other key appears to be fine. The LED flashes nice and bright when I press a button (continuously for the unlock button, and pulsed flashing for the trunk, as you would expect.)
I just replaced my immobilizer after my last one got water damaged. The old one still allowed the car to drive, but things weren't perfect: the remote range was poor, the head/tail lights didn't flash when arming the alarm system. I've been driving the car for the last year or so with the old immobilizer; however, I decided to replace it since I knew it was broken and I am also troubleshooting O2 sensor problems and wanted to eliminate variables. About a month ago, my remote range went from short to non-existent and I had to revert to the old-fashioned "key in the lock" method. I figured the receiver in the immobilizer finally bit it and was thankful that I had a new one on the way.
Fast forward to today, I replaced the immobilizer, programmed it with a PST2, transferred the remote codes from the old immobilizer to the new one and low and behold, nothing! The remotes still don't work! I tried relearning the keys into the new immobilizer manually using my key codes and still nothing. I inspected the immobilizer connector for a broken antenna wire, but everything looks okay, additionally the remote doesn't work even if I hold it right on top of the immobilizer, so I don't think it's a poor signal/range issue.
Is there anything I'm missing?