Welcome to RennTech.org Community, Guest
There are many great features available to you once you register at RennTech.org
You are free to view posts here, but you must log in to reply to existing posts, or to start your own new topic. Like most online communities, there are costs involved to maintain a site like this - so we encourage our members to donate. All donations go to the costs operating and maintaining this site. We prefer that guests take part in our community and we offer a lot in return to those willing to join our corner of the Porsche world. This site is 99 percent member supported (less than 1 percent comes from advertising) - so please consider an annual donation to keep this site running.
Here are some of the features available - once you register at RennTech.org
- View Classified Ads
- DIY Tutorials
- Porsche TSB Listings (limited)
- VIN Decoder
- Special Offers
OBD II P-Codes
- Paint Codes
- Videos System
- View Reviews
- and get rid of this welcome message
It takes just a few minutes to register, and it's FREE
Contributing Members also get these additional benefits:
(you become a Contributing Member by donating money to the operation of this site)
- No ads - advertisements are removed
- Access the Contributors Only Forum
- Contributing Members Only Downloads
- Send attachments with PMs
- All image/file storage limits are substantially increased for all Contributing Members
- Option Codes Lookup
- VIN Option Lookups (limited)
2010 Carrera S 6M Cab 150k miles
TLDR: Dealer tells me the code is 2402 and Durametric returns 0024 with a description that matches the dealer.
I am getting screwey values when I look up actual values.
I try to clear codes and they don't seem to clear.
Has anyone else seen this?
I got CEL after about 1000 miles after replacing the catalytic converters myself. I pulled the codes with my Durametric and got:
0024 - DMTL Diagnosis module for tank leakage; pump drive rUpper limit exceeded
0010 - Intake camshaft driver
I took it to Porsche because I wrongly figured this was related to my cats. They pulled the codes and said the car was throwing 2402 and that the 0010 was in the system but had been there for a long time and was not relevant.
Now I had cleared that 0010 about a half dozen times so I thought it was fresh. It did not register at the time, but that means my reset did not work.
They said that it would cost $1,100 to replace the DM-TL and filter. It was very likely the right thing to do because they tried to actuate it and it would not spin.
As I have dropped about $14k on my Porsche habit in the last 30 months and my wife has had about enough of this, I paid the diagnostic fee and replace the parts myself (saving about $700).
Now my Durametric is still pulling the same codes plus a new one:
0014 which it says is No signal/communication
That code, like the 0024, is not in my copy of the Porsche 997 essential companion.
So when went to look at live values relevant to the DM-TL the Durametric was putting in some weird results. Percents or bars when the units should have been seconds.
Background: DM-TL is a complicated pump/sensor that determines that there are no leaks in the gas fume recycling system. It pulls low amps if there is a leak, so a high value means there is a problem with the pump or maybe a short.
2000 Boxster Tiptronic with 113k mi. I recently removed the transmission to deal with another issue, but while doing so some of the brittle SAI hoses cracked and/or became disassembled. I have replaced the cracked lines (i.e. not all of the lines) and reconnected according to the following picture, with the exception that I have a Tiptronic and there is a hose that runs to a changeover valve on the transmission:
I get the typical SAI codes, P0410 (80) and P1411 (208), about every 150mi driven. Otherwise the car drives great...SAI pump is running and holding air as usual.
Presumably, I have something connected incorrectly, possibly with respect to connection to the transmission changeover valve. The one thing I notice different than before removing the transmission is that the car seems to be running cooler than before. I suspect this could be caused by the changeover valve for the transmission as I think it controls the flow of coolant to the ATF cooler (not sure about this and hoping for clarification). The other thing that I don't really suspect, is that the new hoses used do not have the small bulbed end to help with that snap-fit into the intake sleeves.
I have not found a good image showing the SAI hose routing for a 986 Tiptronic, so if anyone knows of one I would be very grateful. I have the Bentley manual which also does not show a Tiptronic-specific diagram for SAI routing.
Any other ideas or does this sound like simply incorrect hose connections?
Many thanks for your input!
By Angel Martin
I need to replace the ATF wiring harness in my 2002 986 w/ tiptronic due to a defective temperature sensor that forms part of it. I have been unable to find any information as to what it entails and / or how it can be replaced. Appreciate any insight.
By Branko Ljubetic
Hi. Im new in this forum, and i registered search for help, so thanks in advance.
I bought a 97 boxster tiptronic, with no issues at all. Scanned, everything was ok. Then i started to read about the model, and i was concerned about de IMS, so i replaced it with parts from Pelican. I took the oportunity to drain the torque converter and replace fluid (filters gaskets also) on the tiptronic transmission. Then my mechanic built everything, and the lights on the gear and lever on the panel were blinking. Also cant use "manual mode" nor the 5th gear. He checked everything, but the problem are still there.
Searched on the interenet, seems to be something called "limited driving programme" where the transmision limits itself in event of a failure. On the internet also i found most of time is related with transmision servicing, but i changed all fluid (torque converter including).
I used the recomended ATF by manual (pentosin) and changed filter, gaskets from ZF (the transmission manufacturer).
Sadly, i live on a small city in Northern Chile, almost 2000km from a Porsche authorized mechanic in capital, Santiago, so its not an option to take the car there.
My mechanic here is a really honest guy, but he seems to not understand this transmission. I dont know what to do, but ill scan the car in a few hours.
Any advice will be hughely appreciated guys. Thanks a lot.
I need some help reconnecting the vacuum hoses on my '03. Had to remove tiptronic to repair it, and either have a broken vacuum hose, and/or am as lost as I can be. I can't figure it out. Here is the vacuum diagram from the trunk. Part of the problem is, that I can't identify all the parts.
The "white" connector goes into the intake. Off of that is a "Y". The "Yellow" line (vacuum hose) goes nowhere that I can tell. I am sure it connects somewhere, I just can't tell where. It is long.
The "Pink" end of the "Y" is open. I am sure something sticks in there, just not too sure what.
The "Green" line (vacuum hose) connects to what I believe is the Resonance Flap Valve. However, it is either broken (and connects with the "Blue" line (vacuum hose)), or inserts into the "Pink" end of the "Y". Not too sure which.
The other end of the "Blue" line (vacuum hose) connects to a 4 way "Cross fitting", that connects to the vacuum reservoir. Shown as connection #1 below.
I guess the upper end of the "Blue line" (vacuum hose) could connect to the "Pink" arm of the "Y". Again, not too sure.
It is entirely possible, that the "Blue" and "Green" line is a broken line. If this is the case, not too sure what would plug into the "Pink" on the "Y".
#2 "White" line (vacuum line) attaches to a switch, that I believe is associated with the tiptronic transmission. The lower end of the hose connects to the "Cross" fitting that is by the vacuum reservoir.
The "Purple" line (vacuum line) is attached to a valve that controls coolant that goes to the tiptronic.
#3 Line disappears somewhere deep into the engine somewhere.
Can anyone help?