Jump to content

Welcome to RennTech.org Community, Guest

There are many great features available to you once you register at RennTech.org
You are free to view posts here, but you must log in to reply to existing posts, or to start your own new topic. Like most online communities, there are costs involved to maintain a site like this - so we encourage our members to donate. All donations go to the costs operating and maintaining this site. We prefer that guests take part in our community and we offer a lot in return to those willing to join our corner of the Porsche world. This site is 99 percent member supported (less than 1 percent comes from advertising) - so please consider an annual donation to keep this site running.

Here are some of the features available - once you register at RennTech.org

  • View Classified Ads
  • DIY Tutorials
  • Porsche TSB Listings (limited)
  • VIN Decoder
  • Special Offers
  • OBD II P-Codes
  • Paint Codes
  • Registry
  • Videos System
  • View Reviews
  • and get rid of this welcome message

It takes just a few minutes to register, and it's FREE

Contributing Members also get these additional benefits:
(you become a Contributing Member by donating money to the operation of this site)

  • No ads - advertisements are removed
  • Access the Contributors Only Forum
  • Contributing Members Only Downloads
  • Send attachments with PMs
  • All image/file storage limits are substantially increased for all Contributing Members
  • Option Codes Lookup
  • VIN Option Lookups (limited)
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By EPiSKiNG
      Greetings!
       
      I recently bought some replacement halogen assemblies to replace my browned/burned headlights.  I'm going to use the halogens that are currently in the headlights, but am wondering what the best option is these days for HID, LED/Projector replacement.  Above all else, I don't want to melt my lenses, and I want to maintain the stock look of the car, cause ya know, it's gonna be a collectors edition one day ? The most recent topics I've seen are at least 4 years old...
       
      So far I've seen Pelican's Xenon/HID retrofit kit: https://www.pelicanparts.com/More_Info/STHIDH96000.htm?pn=ST-HID-H9-6000&SVSVSI=1054 and Pedro's Garage TechnoLite HID: http://pedrosgarage.com/Site_2/TechnoLite_HID.html
       
      Thoughts?
    • By loganmarriott
      Hello
      Im working on a unique porsche project and as part of it im looking to use the current (>2016) generation 95B Macan LED HeadLights. 
      What im looking for is the Wiring Diagram from the service manual program, so i can trace what needs to be connected to where relative to my 997.1 wiring harness.
      Yes, im aware this will be difficult. Im not looking to just plug and play.
      I already have all the wiring for the 997.1 and 997.2 cars (and a few others)
      Can anyone help
       
      Regards
      Logan Marriott
    • By Ordonezp
      Hi y’all! Thanks in advance for reading this—there’s so much kindness and knowledge in this blog and I appreciate it so much. 
       
      Had a quick question—how exactly do I operate my rear fog light on my USA sold ‘99 Boxster 986?
       
      Though I’ve read on forums that I’m supposed to push the front light stalk until I hear a second click (at which point the rear fog light will be on), I don’t see that option on my car. My stalk only clicks one way for the front fog lights—no second click. 
       
      Same goes for the lights dial—the manual shows that I should be able to turn the dial counterclockwise for the fog lights, but it doesn’t seem like my dial turns that way to the left. Is it possible the dial is stuck or something? 
       
      Currently, when the car is on and at least the parking light is turned on, however, it appears that the driver’s side fog light is on—so I’m guess either there’s something wrong with a switch/wiring or I accidentally turned it on at some point and don’t know how to operate it properly and turn it back off. 
       
      Im attaching some pictures of what the lights look like and what my lighting dial looks like. You can see that the fog light is lit on the driver’s side, and is not on the passenger’s. 
       
      I’d appreciate any help or advice! 
       
       



    • By Gnochi
      Hi all,
       
      I'm in the midst of designing a DRL setup for my 996.2 (which is a topic I recognize has been done to death). That said, I'm not a fan of LED light bars, and while I don't mind halos, this is a Porsche, not a BMW. Therefore, I'm taking inspiration from the Four Point Principle.
       
      I'm using 8x total Luxeon Star 10mm square LED blocks, neutral white, with 10mm square Carclo 10415 elliptical-pattern lenses, and a 350mA FlexBlock on each side. DRLs should be on the order of 400 lumen per side and 1500Cd at the center, so I'll be using slightly lower currents than the LEDs are made for. As soon as I get dimensions 1,2,3 in the attached image, or even better a damaged 996.2 headlight unit, I'll figure out heat sinking, but it will be relatively unimportant at 4W per side, 150C maximum junction temperature, and 100F approximate steady state temperature insight the HID housing (per Pedro's Garage).
       
      As far as wiring goes, here are my requirements:
      DRLs turn on with the engine DRLs turn off with the low beams The low beams can be turned on whether the engine is on or not.  
      There are several ways to do this, of course, and I think I've picked the easiest:
      1x Bosch relay with both NC and NO pins, connecting to 1x 928-610-511-00 relay carrier added to an open spot in the relay block Pin 30 connects to a fuse tap at A6 - Seat heater (switched on with ignition) Pin 85 connects to any conveniently-located bolt to chassis, possibly in the fuse box. TBD. Pin 86 connects to a fuse tap at A9 - Low Beam Right (switched on with headlights) Pin 87a is wired to the left and right FlexBlocks in parallel. Pin 87 is not necessary  
      The relays I have take about 150mA to switch, which *shouldn't* noticeably affect the low beams, but does put additional stress on the headlight switch. If that causes problems I might need to do the following instead:
      2x Bosch relays with NC/NO pins Pin 30-1 connects to A6 Pin 30-2 connects to D5 - Cigar lighter (always on) 85-1 splices into 85-2, connected to chassis ground 86-1 splices into 86-2, interrupting the YE/WH wire running from the light selector stalk before it splits to go to A9/A10/Canada DRL block 87A-1 is wired to left and right FlexBlocks as above 87-2 is wired to the other side of the YE/WH split  
      Thoughts? Anyone have input on headlight switch reliability or wiring plans?

    • By Thomas Pxrry
      Recently I developed a glovebox light issue on my boxster 987 s
      I Attempted to replace glove box light with led and now it doesn't work at all, even with the standard bulb is put back that worked before, nothing.
      Attempted to swap with the footwell bulb and light housing, nothing
      Following this when locking the car the horn would sound
      So ... I Replaced the cable attached to the bulb holder part 99761265100 (glove box wiring harness). This includes a small metal switch that is pushed into a holder at the back of the glovebox
      This solved half of the problem, The car horn no longer sounds when locking
      However the light in the glovebox still is not working
      Swapped it again with the working footwell light and still nothing
      All of the other lights I replaced work perfectly.
      As I am aware there is no fuse for this bulb
      So how is it fixed. Even porsche themselves are confused????
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.