Jump to content

Welcome to RennTech.org Community, Guest

There are many great features available to you once you register at RennTech.org
You are free to view posts here, but you must log in to reply to existing posts, or to start your own new topic. Like most online communities, there are costs involved to maintain a site like this - so we encourage our members to donate. All donations go to the costs operating and maintaining this site. We prefer that guests take part in our community and we offer a lot in return to those willing to join our corner of the Porsche world. This site is 99 percent member supported (less than 1 percent comes from advertising) - so please consider an annual donation to keep this site running.

Here are some of the features available - once you register at RennTech.org

  • View Classified Ads
  • DIY Tutorials
  • Porsche TSB Listings (limited)
  • VIN Decoder
  • Special Offers
  • OBD II P-Codes
  • Paint Codes
  • Registry
  • Videos System
  • View Reviews
  • and get rid of this welcome message

It takes just a few minutes to register, and it's FREE

Contributing Members also get these additional benefits:
(you become a Contributing Member by donating money to the operation of this site)

  • No ads - advertisements are removed
  • Access the Contributors Only Forum
  • Contributing Members Only Downloads
  • Send attachments with PMs
  • All image/file storage limits are substantially increased for all Contributing Members
  • Option Codes Lookup
  • VIN Option Lookups (limited)

Recommended Posts

Hello everyone, I am new to the forum. I own a 98, bone stock, manual Carrera and here is my attempt at scattering the clouds over 996. Hope you'll like & share.

 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By Scott D Troy
      In the last 2 weeks I bought my first Porsche - a 2001 Carrera 4 tiptronic coupe.
       
      1) Is it supposed to say Carrera 4 or Carrer 4S on the back?
       
      2) Is there a Porsche specific website where I can find a photo of the correct rear decklid badges for each 996 model? I tried Google for 2 hours last night.
       
      I simply trying to determine if my 01 Carrera 4 should read Carrera 4 or Carrera 4S on the back.
       
      Thank you!
       
       
    • By stephen magee
      wires came out of my camshaft sensor and not sure what order they are
       
    • By Kevin Bryck
      Okay this is REALLY specific.
      The adjustable tension cable on the drivers side of my cabriolet disconnected at the top where it threads (8mm) into the top frame, not at the bottom where it snaps onto the ball.
      The is a larger diameter (10mm?) clean smooth painted hole where the cable needs to thread in, which leads to the presumption that there was a nut on the back side?
      Searched all over including removing driver's side rear 'door' panel and fishing around with a magnet but no loose nut found.
      Looks like getting to back side of this frame casting would entail a major disassembly of the cabriolet top frame?
       
      Also, what does this clip that goes over hydraulic cylinder do?
      Right side clips is in place about halfway down length of cylinder.
      Left side clip was down around the base of the shaft.
      Replacing it where there appears to be a shiny spot looks like it would interfere with the cabriolet top potentiometer arm.
      Right cable threaded into frame at top
      Right cable threaded into frame at top
      Missing cable location
      Smooth clean painted hole in top frame where 8mm cable end is supposed to thread in
      Left cable
      Left upper cable end with 8mm thread
      Clip question
    • By davemac
      Hi everyone,
       
      I've had a spoiler warning lamp on since I bought my 1998 996 convertible a few years ago.  As an electronics engineer, I decided I may be able to tackle this issue myself. Before starting, I have read numerous previous posts regarding this issue, and what the fixed-wing bypass harness (996 612 070 51) does.
       
      When the rear spoiler is elevated, I'm getting zero Ohms between the Grey/Brown (A2) wire and the Brown (A5) wire, as expected. This becomes open circuit when the lid is lowered. There is then zero Ohms between the Brown (A5) and the Green/Grey (A4) wires, again as expected! The switching of the brake lights works normally too, but still the warning light persists.
       
      I am wondering if there could be a corroded plug/socket further forward from the rear of the car because the one at the back is very clean and the microswitch states are normal in both positions. I'm not sure if this is a common fault, but I'm guessing it probably isn't as I can't find anything online. One thing I have noticed is that although the manual up/down wing rocker switch works, I have to keep is pressed down until the wing is down. When I try to elevate the wing manually, the switch triggers the latching function of the relays, but when the spoiler is fully up, I can still hear the motor continuing to turn and the gears slipping inside the rear mechanism. The gears will eventually strip and I'll end up with a bigger problem, so any thought on this nuance would be greatly appreciated.
       
      Many thanks,
      Dave

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.