Welcome to RennTech.org Community, Guest
By Alexis Pelezo
I have an intermittent static issue. It seems to originate from my center speaker near the clock on my dashboard. When the suspension is lowered it it more prevalent but it also happens before I even start my car. There could be weeks between hearing it and other times it will go on for hours. I suspect I have a loose wire in the amplifier? Is this an issue anyone else has ran into?
Greetings all... Over in the Cayenne section there is a post about the PCM System error: UNKNOWN UNKNOWN UNKNOWN UNKNOWN UNKNOWN UNKNOWN UNKNOWN when starting the system up... no ultimate resolution but the consensus for the cause is a break in the line... I have a 2004 Turbo Cab and installed a MoBridge system and have had ZERO issues. My Parents have a 2004 Turbo Cab where the previous owner went cheap with either the Nav-Tv adapter, the installation, or BOTH (But when you get an otherwise pristine Turbo Cab with 28,000 miles for $42K, you don't nickel and dime). The installer unplugged the CD changer and pulled the plug off of the fiber optic wires (that plugged into the changer) using a line break splice to plug the two wires together instead of plugging in a loop per the NAV-TV instructions. I bought both male and female loops so that I could put the vehicle cables into a new plug and install the other plug with the loop. Since the issue isn't resolved (but the audio works so this has to be the "break") I have to assume it isn't getting a good connection. Upon closer examination, the fiber optic cable ends on the loops are gold metal and shorter than the plastic ends in the car loop. This end difference prevents the plastic ends from seating far enough into the plug to make a good connection. Any advice on how to either replace the ends, or a part number for the original Porsche plug that I could match with a different loop? I am thinking that Porsche probably have a plug that goes into the CD Changer MOST connector for vehicles that don't have the changer installed...Thanks!!
Hey guys and gals I have a 2010 Porsche Cayenne base and I’m having trouble connecting my IPhone 6S Plus to my PCM running software version 1.47. Now I know that Apple phones don’t accept the sim access profile, but I can’t figure out how to switch the PCM over to Hands free profile. I went to my local Porsche dealer here in Tucson, AZ today and I told them that I had read online that they should be able to switch my PCM from SAP to HFP, but after 1 1/2 hours of trying they said that the couldn’t find how to switch it over. Any suggestions? Can it be changed using a durametric? Should I talk to another dealer in Phoenix? Any suggestion or insight will help. Thanks in advance.
I replced the CDR23 with Seicane Android HU. It comes with Canbus adapter and I purchaed MOST adapter with it to make it work with factory Bose amp.
The unit powers up fine, but the MOST adapter needs to have power to work. Any suggestion where can I connect the three wires listed in the pic to? I assume the main socket that was connected to the CDR23 has power, but don’t know which wire is which. How easy would it be to get power from lighter adapter aux? I am planning to replace that lighter adapter with USB port for the HU as well.
I recently had a dead battery in my 2007 Boxster with PCM (no bose). Once the car charged everything seemed fine. The Navigator and CD work perfectly. However, the radio will only pick up stations when it is in accessory mode. Here is how it goes: Car running - no reception; turn off motor; 1-4-8 reboot; radio works fine. Turn on motor - 4 seconds later the radio no longer picks up stations (static). However SOMETIMES one station will come it. I did the MAIN-TRIP diagnostics and it showed ! PCM; ! SOFTWARE; Ck Navigator.
I took it into the shop today and they ran some diagnostics and said that it showed nothing wrong. The dealer said that I would have to get a replacement PCM and then quoted a price in 4K range. Has anybody seen this type of problem before, and if so is there a solution? Also if I have to replace the PCM are there less costly options than 4K. Thanks for any suggestions in advance.