Server Lease Renewal/Software Licenses - Goal Reached!
A big Thank You to all those that donated to help us reach our 2019 goal (and pay the site operating costs)!
Just an FYI - if all members of this site had donated - then the cost per member would have been less than $0.06 each.
Thanks again to all of you that did contribute!
Welcome to RennTech.org Community, Guest
There are many great features available to you once you register at RennTech.org
You are free to view posts here, but you must log in to reply to existing posts, or to start your own new topic. Like most online communities, there are costs involved to maintain a site like this - so we encourage our members to donate. All donations go to the costs operating and maintaining this site. We prefer that guests take part in our community and we offer a lot in return to those willing to join our corner of the Porsche world. This site is 99 percent member supported (less than 1 percent comes from advertising) - so please consider an annual donation to keep this site running.
Here are some of the features available - once you register at RennTech.org
- View Classified Ads
- DIY Tutorials
- Porsche TSB Listings (limited)
- VIN Decoder
- Special Offers
OBD II P-Codes
- Paint Codes
- Videos System
- View Reviews
- and get rid of this welcome message
It takes just a few minutes to register, and it's FREE
Contributing Members also get these additional benefits:
(you become a Contributing Member by donating money to the operation of this site)
- No ads - advertisements are removed
- Access the Contributors Only Forum
- Contributing Members Only Downloads
- Send attachments with PMs
- All image/file storage limits are substantially increased for all Contributing Members
- Option Codes Lookup
- VIN Option Lookups (limited)
By Michael hurta
Hi - 2002 996: Scoured the lists but can't find this particular cluster problem anywhere. In short, my salvage cluster shows a list of errors on start up but my original was fine.... Here's the details. My current cluster shows an intermittent airbag failure warning on the led screen followed by the idiot light. It usually occurs at start up, clears at the stalk and the idiot light remains on, but flickers on occasion. My mechanic had ruled out everything he could related to the airbag warnings and since he didn't have a spare cluster, couldn't swap to test for that. I personally purchased a salvage cluster, removed the battery terminals, installed it and it came to life (I'm also having to buy replacement connector housings because mine disintegrated). The problem is the info screen pretty much scrolled through a variety of issues like oil pressure feedback, temp feedback, fuel feedback, etc. The oil pressure gage was also unresponsive. I expected the odometer to be wrong, but didn't expect all the errors. I also started the car and while it ran, it did run rough, sputtered a bit. Do I have a bad salvaged cluster? Does the cluster need to be programmed (beside the odometer)?
By Kevin Bryck
Welcome everyone to another installment highlighting the wonderful world of fragile Porsche parts!
Have both 17" and 18" wheels and have recently lost the metal Center Cap logo medallion off of one wheel of each size.
While removing the other center caps every remaining medallion fell right off in my hand.
Metal medallion secured with a random dab of some type of adhesive.
We have reached the end of lifespan of whatever adhesive the Center Cap supplier used to keep precious colored metal medallions stuck to those cheap plastic caps.
Anyone know how to remove old adhesive?
Anyone have any idea what adhesive to replace it with?
Anyone know how much the Porsche/Piech families made selling replacement center caps last year?
Remember when paying through the nose for your precious replacement Center Caps that the Porsche and Piech families are the 7th wealthiest oligarchs in the world per Wikipedia.
This will be my first post, thanks for a great forum !
I've recently purchased a exhaust system from Design911 in the UK which has the valvetronic function on. This is said to replicate the PSE which my car does not have factory installed.
Wired it up and put the vacuum hoses, tested the system and it works fine.
Over to the issue for my car:
When starting up the car, the neutral positon of the valves is open, which means a lot of noice from the exhaust.
When switching this by the solenoid, sending vacuum into the system and the valves closes. This means less sound.
But when the valves is closed the car wont run properly at the RPM range of 5500-7000 RPM's there is also fault codes for misfire on cylinder 2.
The strange thing is that this works perfectly when the valves is open. I've tried two differnet vacuum sources, into the ressonator and also for the left hand side cooling system vacuum solenoids. Without any differnce. I tried to run vacuum directly to the vacuum actuators on the exhaust without any difference and also tried manually applying vacuum and using a one way check valve to keep the vacuum while not connected to the cars vacuum line. No vacuum leaks, no fault codes when driving with the valves open.
Same result every time. So have anyone had some similar issues to their car ?
Thanks in advance for any help !