johnbruni

in the DIY instructions it might be helpful to mention the secret screw buried inside the switch race. hard to see and know that it is there and you cant get the vent cover off without taking it out.

thanks

jb

thanks for all the useful info, have 02 cab that does not want to close until I give the throttle a tap. Once the RPM's of the engine are up a bit, it co-operates and closes. Do you think that could be low fluid?

jb

Do yourself a favor and pick up one of these little helpers. works awesome for getting the bolts out of the coils. also great for interior screws in tight places.

Thank you!

2002 C2 Cab

Just got done replacing my coolant tank. I found that I needed to lower the engine about 3 " in order to fit the larger coolant tank into the cavity. Once I lowered the engine it poped right in and everything was connected and tight within 20 minutes.

2002 C2 Cab, 3.6l engine..

has anyone done the coolant tank replacement on this engine? The tank seems to be larger and more difficult to remove as the fuel rail gets in the way of the bottom hose connection to the coolant tank.

Someone mentioned lowering the engine an inch. Does anyone have the infomation to accomplish that? It seems that that would get the fuel rail out of the way and the tank would slide back in.

Thanks for any help

a great amp that fits where the cd player was in the C2 is the Alpine PDX series. I have one 4 channel amp with focal speakers and it works great.

I just ordered an Alpine PDX-4.150 amp. It has a really compact form factor and fits really well in place of the CD Changer ( I dry fitted one at the local hi-fi shop). Alpine has 2 other models (2 channel and 2 channel) with the identical form factor and they are stackable!

I will update when I receive the unit and get it installed along with the Focal 100 KP's in the dash and the Focal 13KS (5" subs) in the doors.

I have a 2002 cab with bose hi-fi option along with the Pioneer Z1 I installed earlier this year.

Thank everyone for all the help provided in these forums.

Please view attached image of PDX installed in place of factory CD changer. I fabricated a simple sheet metal bracket (using the cd changer bracket as a template). I left the bottom area open by framing the bracket with 1/2" square tube to allow all of the wiring to be attached from below.

Then bracket allows space for another PDX unit to be stacked on the front of this one if I elect to go nuts and power 2 more channels for the rear speakers.

I was told the fuel filter changed in MY02 for C2 and is intergrated with fuel pump? is that true?