Jump to content

Welcome to RennTech.org Community, Guest

There are many great features available to you once you register at RennTech.org
You are free to view posts here, but you must log in to reply to existing posts, or to start your own new topic. Like most online communities, there are costs involved to maintain a site like this - so we encourage our members to donate. All donations go to the costs operating and maintaining this site. We prefer that guests take part in our community and we offer a lot in return to those willing to join our corner of the Porsche world. This site is 99 percent member supported (less than 1 percent comes from advertising) - so please consider an annual donation to keep this site running.

Here are some of the features available - once you register at RennTech.org

  • View Classified Ads
  • DIY Tutorials
  • Porsche TSB Listings (limited)
  • VIN Decoder
  • Special Offers
  • OBD II P-Codes
  • Paint Codes
  • Registry
  • Videos System
  • View Reviews
  • and get rid of this welcome message

It takes just a few minutes to register, and it's FREE

Contributing Members also get these additional benefits:
(you become a Contributing Member by donating money to the operation of this site)

  • No ads - advertisements are removed
  • Access the Contributors Only Forum
  • Contributing Members Only Downloads
  • Send attachments with PMs
  • All image/file storage limits are substantially increased for all Contributing Members
  • Option Codes Lookup
  • VIN Option Lookups (limited)

malahhaor

Members
  • Posts

    1
  • Joined

  • Last visited

Posts posted by malahhaor

  1. On 8/18/2018 at 2:39 PM, ivass said:

    Follow-up ... I found a post which showed that on a car with an electric wing, one can reach the latch from under the raised wing. Since my car has a fixed wing, I could not do that. Instead, I reached through the louvers of the deck lid (pic1), removed the rubber shroud that goes to the intake, reached in under the black plastic cover of the engine (used a few rags to hold the plastic pulled apart), and was able to see and  push the latch with a long screw driver, right where the cable was supposed to attach. Pic 2 shows the disconnected cable and, pic 3 and pic 4 show how it connects. The issue is that the plastic clip holding the cable is not to strong and pops out easy. Part of the issue is that the cable attaches to the air intake (pic 8), and every time you pull out the intake pipe, like when you change oil, you put strain on the cable and it can pop out. My solution was to fabricate a small bracket (pic 5), and bolt it on top of the plastic clip using one of the bolts holding the latch mechanism plus an additional 6mm bolt which I added to an existing hole on the latch (pic 6 and 7). 

     

    Note in pic 9, the location of the emergency lid release. This cable can be reached by raising the electric wing, but is unreachable on cars with a fixed wing. Plus, it is attached to the actuator, so if the cable pops out from the latch, it is of no use. I tied up some 60lb fishing leader to that cable and routed it above my tail light so I can use it if the electric release fails. The main issue I see with the design here, is that the emergency release cable is not independently attached to the latch mechanism. I will consider adding a whole new emergency release cable in the future.

     

    Ivo 

     

    2.jpg

     

     

    5.jpg

    6.jpg

     

     

     

     

     

    Priceless info. just had this happen on mine, with less than one week ownership. Was very upset but this helped allot. Dealer quoted $500 to fix. saying i need a new latch system. I also think they efed up when changing oil.

    Going this route as well so it doesnt happen again.

     

    Thank you very much!!!! . 

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.