dstyrrell

Would just putting some insulation tape over the metal legs that plug into the board not also work and then you dont have to cut anything

This is exactly what i thought , i dunno if it will still plug in with tape on im gonna have a look later .

Hi,

I have a noise coming from the air con, i thought it may have needed just a regass but had this done yesterday and the noisy is still there, any ideas ??? It goes when you turn off the air con so i'm thinking pulley or tensioner, problem is i'm not that familiar with the set up. The system had no leaks and it works perfectly well but the noise is doing my head in!!

i was wondering if the aircon has a independent tensioner ?? i'm hoping the compressor pulley bearing isn't shot!! can you get these repaired ??

If anyone can shed some insight i'd be glad

Dave

It just pulls off. You have to be brave and just ease it off from one side.

Brilliant thanks for your help :D

Unclip the mirror glass, disconnect the heater wires, and there are 3 torx screws which hold the cover onto the mirror frame. Once you get these out it lifts off - watch you don't lose the rubber seal strip underneath.

Thanks Richard,

Sounds easy, just one thing . . . . . does the mirror glass just pull off or do i need a screw driver or something?

Thanks again

Dave

Hi,

I am having my front bumper and wing mirror resprayed at the weekend, not keen on leaving my car there as i dont trust anyone, i know how to remove the bumper not sure on how to remove the side mirror??? does anyone have a guide for this ?

Hope someone can help

Many Thanks

Dave