ubu

last news from Porsche AG

important failure in engine bolt, 9A110311502, at connecting rods, destroying the oïl span.

All the 900 and more delivered engines to be removed and changed by new !!

Take time to have your own...

http://topgear-magazine.com/post/77727250088/ready-to-drive-your-new-gt3-richard-most

this is the solution

delete one by one

the only solution

Any idea to find the plastic circle around airbag on sport steering wheel ?

seems not detailed by porsche dealer. :(

Right Richard

After erasing faults and recheking all potentail air leaks in MAF, Throttle and IPD mounts, it became perfect

Thanks for the help

thanks Richard I will recheck

but

- at durametric I have an error code on PAS 8004 Supply voltage clamp 50 sc + and 8005 supply voltage clamp) 5 cs+. This is the reason of my suspiscion

- and the engine runned 3/4s not only once but at each starter demand; If the pump failed, I think I could not have these repeated engine starts.

Hello

After having disconnected battery for a night to change the Air Filter and the MAF for new; it was impossible to have engine restarted but a quick engine-running during 3/4 seconds and looking as lack of gas.

I suspect having PAS disconnected as if the car would have been stolen;

Impossible to restart correctly

Any idea to recover the situation or have I to go Porsche dealer ?

Thanks for help

Thanks Loren

I had a mail back from Greg at IPD

Hard reboot is the solution and now idle is back to 650 r/mn

- shut out battery at negative for 30 mn

- engage key just before start for 1 mn

- push the accelerator pedal once

-close key out

- put key

-start

- push PSM button

thats ' it

Hi all,

Just mount new plenum ipd 74 mm and K&N air filter on 3,4l boxster S MY 2007

but idle jumped at 1400 r/mn instead of 700 r/mn before, even after 50 miles test

Any idea or solution ?

thanks per advance

Looking in the front electric harnesses inside front luggage room any direct potential link with "in run or start only" electric location or other solution to step from gen 1 to gen 2 day leds. Any idea?

Hi

Any of you have a good detailed explaination step by step with photos for 987S 2007 front spoiler removal ?

I need to replace the failed horns.

Thanks

You are replacing horns? Are you needing to remove the bumper cover or the spoiler? There are several articles here and on rennlist and 6speed that cover bumper cover removal. Not sure of any that just have the spoiler removal?

Good luck.

DC

Yes apparenltly I need to. If you know another method I will appreciate

Not seen any good detailed DIY with photos on renntech

Hi

Any of you have a good detailed explaination step by step with photos for 987S 2007 front spoiler removal ?

I need to replace the failed horns.

Thanks

Hi

New on forum

Has any experienced moving Boxster horizontal side grilles to Cayman vertical grilles at air intake side level ? :huh:

Hello, Help dead battery, trunk will not release. It's in the garage not much room to get around. Can't get into trunk to charge battery. Help. Car doesn't have the hood release in fuse box.

1/ Opening the plastic arch at front inside one of the front wheels location ( right or left depending model year ), you will find a secret manual cable in order to open the trunk :P

or

2/ Inside the fuse box at left of driver legs, you will find a dedicated button to pull and to use as + of any charger ( - on car itself) :)

or

3/ As said having a porsche charger to fit with the cigare lighter in the middle box ;)

On my 2006 987S one of the two horns failed on me this summer. It was covered under warranty. I was in & out of the dealership within 30 minutes. They did NOT pull off the front bumper.

Nice and you what he did?

Can anyone provide instructions for front bumper cover removal on a 2005 987. The DIY instructions here on Renntech for the 986 don't work for the 987. Thanks for any help!!

look at this :

http://www.renntech.org/forums/index.php?s...hl=horn+failure ;)

:angry: 1 one of the 2 traffic horns failed. :huh: Any solution before putting out the front bumper ?

thanks