kenobiben

Hi,

to stop warning light just put a 16.7 tvs diode on the power supply cable of the xenon ballast.

I did the same mod and solve warning light problem and spoiler stop working with this.

RS code 815-2575.

Bye

Hi,

yes definitely is one hydraulic lifter, I have the same noise when not drive my c4s for more than 1 month, but after few minutes the noise go away, hi think is when the oil become at good temperature.

Hi,

if you want to install footwell light, just take the +12v - gnd near the fuse box (see photo), there is 2 group of cable, a big one and a smaller who go to the door, take it in the smaller.

+12v Red/black

gnd Brown/yellow

This is the supply of panel door light and they dim as the roof light.

Just made a solder on the wire after cut off a little piece of insolation by knife. After it put isolation tape on it.

That's all

HI,

in my 2003 996 LHD the sound of phone comes from passenger side(right seat) like you.

I think it's normal because the microphone on the left of cluster is very near to left speaker, so if sound

comes from left side you can have echo or larsen effect.

I tried it in my 2003 911, and also on pre-02 996. same effect.

 

I wanted to try another version of piwis, but wasn't able to find any working download link - all of them expired. Does anyone have v31 available?

Hi, I had the same problem especially when perform an automatic full scan of module and solved after installation of V27.

If need more information please PM me

Bye

PS: Sorry Richard  :blush:

Hi Rob

just doing the Tiptronic oil ATF change and I confirm Fuchs ATF 3353 is red color. The used who comes out from tiptronic is brown after 90000km.

Hope this help you

Bye

HI all,

there's a youtube DIY for this

http://youtu.be/KTEm9c5ANEc

Bye

I did it, take +12v from fuse box and you can go to the trunk passtrough a hole on the top of the fuse box.

You had to remove the bumper for easy route of cable and glue the drl with neoprene.

2h of work but easy.

Hi all,

I have a 996 c4s MY2003 with PCM2. I want to change the battery. Need any radio code after change it or is it coded with instrument cluster or dme?

Thanks for help

Bye