Docdanracy

You are correct Loren

Second number is 140.01

I assume on wheels with both of the second set of numbers is the 10" variety

I believe I had a set of those rear wheels on my '99 996..

Hollow spoke

Found a very nice set of wheels....

Need to figure out if they are hollow spoke or solid and the sizes..

Seller really doesn't have an understanding of what I am looking for..

Here are the part numbers from the back of the wheels

99336213405

99336213800 also 9933621400A

So what is the verdict?

Thanks

Try checking your spark plugs.

A loose plug can cause a high pitched squeal...changes with RPMs

I had a similar noise and found two loose plugs.

Thanks for the quick reply

My current Boxster is a 2003S I purchased a few months ago...it is the lowest optioned BoxsterS I have ever seen.

Bose Stereo and Wind blocker....that's it.

So obviously a little tinkering is in order.

A 4 stalk is needed!

I am getting a used stalk from a buddy who just completed building a spec Boxster.

I will be getting all the wiring complete to the dash plugs too.

I live in Auburn now.

I met you years ago at a home in Almaden Valley...

Henry was his name I believe....also met ToolPants there

At that time I had a 1999 Box

I know OBC can be initialized prior to installing a switch or stalk, with OAT being the default.

Can the cruise control be initialized in the dash and DME prior to installing the 4 stalk?

Loren, do you still live in Roseville area?

Ok

So on another set of wheels

8x18et50

10x18et 65

would those fit without spacers or would I need 12-13mm spacers for the rear?

Thanks again

Rears: 9x18 ET43 with 275x40x18 rubber

Fronts: 8x18 ET57 with 245x40x18 rubber

Will these be direct bolt on or will spacers be needed?

What width spacers?

Will the rear have any interference inside or outside?

Thanks