4.5L Torque/Angle Specs Confirmation for users with Service manuals?

[Mr. Haney]

Good morning, 

 

 I am getting ready to assemble my 4.5 Cayenne engine. The FSM I have has some conflicting/confusing specs. In the section where the torque specs for everything engine related is located it gives a different angle for the inner main bolts versus the section where it goes into assembly. One place says 75° final and the other says 56° final for the inner mains. 

 

 For the head bolts it shows first to go 22ft.lbs. and then 37, then loosen and then to go 22, 22, with final angle of 90°. I feel like there's a misprint or some words missing here. 

 

Can anyone confirm what the specs you have listed are. By the way my FSM is labeled from automotive_manuals.ne(t). It's a pretty good manual but I have noticed some things placed in the wrong sections and pictures/descriptions that don't jive with the workflow. Probably how they cobbled it together.

 

I would post the sections here for reference but my internet is out at the house. Thanks in advance!

[Mr. Haney]

FWIW, I was able to find the correct information through Porsche @ their techinfo website. I had forgotten about this. Through this site you can access workshop manuals, tech info, etc. For 14$ I got an hour of unlimited document downloads. 

 

 

 Scoooooooooooooooooooooooooooooooooore!