Thecoldnw

12 hours ago, JFP in PA said:

 

Check the cable at the transmission end, those ends are known to come loose.

I will be lift it up tomorrow and check on the transmission side. Im just hoping its not something with the actual transmission. 

Hello, i was driving my 2007 turbo yesterday and it was all good until at a stop light i went from 1st to 2nd and as soon as i put it in second the shifter got really loose. When it was in 2nd gear i could move the shifter around as if it was in neutral. After that i put it in 3rd gear and then it wouldnt go back in 2nd, 1st or reverse. If i try to put it in reverse or 1st gear then it goes into 3rd. And if i try to put it in 2nd gear it goes to 4th. If that makes sense. I barely made it home in 3rd gear. Any ideas what it could be? Maybe shift cable? Thanks 

On 6/21/2019 at 5:07 AM, Loren said:

Yes, for Porsche specific fault codes you will need Durametric or PIWIS.

I see! I will be taking it in to a shop next week! Thanks 

3 hours ago, Loren said:

What is the fault code please?

So the water pump relay code went away after driving a day but now the only code i have left is d10002 and it says please refer to vehicle service manual. I think i either need a better scanner or ill be taking it to a shop 😕 the problem is i work monday-friday and cant get the car to a shop because they all closed on saturdays. Thanks for the help

3 hours ago, Loren said:

Did you try clearing the code and seeing if it comes back?

Yes i clear the code and it keeps coming back, its the only code active and i have no idea why. I never did anything with the water pump. Code says “water pump relay, short circuit to b+/open circuit”. So im guessing something with the relay ?

On 6/8/2019 at 4:17 PM, Loren said:

7PP 907 527 A  Temperature Sensor - US MSRP $69.82

 

As  I recall the sensor is in the ducting panel under the dash.

 

 

Hey you are the best! so turns out that sensor was the problem. It was just unplugged from last time that we opened up that panel 😅 completely my fault. Now after driving it for a week i have another code for the water pump relay. Do you know where the water pump relay is on the macan? Thanks 

6 hours ago, Loren said:

7PP 907 527 A  Temperature Sensor - US MSRP $69.82

 

As  I recall the sensor is in the ducting panel under the dash.

 

 

Hey, thank you so much! I will have to open up the ducting and check out the sensor and see what happened. Hopefully it is just a faulty sensor! 

Hello, new to the forum first time posting here! Have a 2018 Macan base and the a/c doesn’t work. I bought a foxwell NT520 pro scanner and it scanned all the codes of the car and came back with 4 fault codes for the a/c. 

008011

008013

008015

all three of those say Passenger compartment sensor-short circuit to ground or open circuit. 

D10002

says please refer to vehicle service manual. 

If somebody could help me understand these codes because i have no clue what the passenger compartment sensor is or where it goes. Thank you!