corriepups

Thanks Richard,

I will have another look this weekend, guessing the plug at the steering side is the one that plugs into the rear left of the stalk module.

Cheers

Has anyone ever found out where wire physically goes?

Stalk plugs into electronic unit so you cant fix a wire to pin 5, Ive got stalk fitted but stumped re wiring it up.

Any help appreciated

No, I found a brand new valve body for a Toureg at a good price and thinking it was identical ( vw and porsche part nos are the same!) bought and fitted it. Started to get error code re clutch slippage. On speaking to Nino discovered that separator plates in valve bodies are different. He converted vw valve body to Cayenne spec by fitting new plate. Working perfectly with no more harsh changes.

Hi,

Anyone in UK with gearbox problems, I can recommend Nino at Beds Automatic Transmissions Ltd. Tel 01582 560224 e-mail info@automaticgearbox.biz

His knowledge of the Aisin/warner box seems second to none and thanks to him I have fixed my harsh downshift at fraction of dealer cost.

Hi,

Does anyone know if its possible to reset the adaptation values of the Tiptronic control unit without PIWIS.

I am changing gearbox valve body next week and wonder if I can avoid a visit to local Porsche Centre to have this done?

Thanks

Thanks for that guys, My car is 04 Cayenne S, 60k miles, I can fairly easily move shaft about 1/4inch up and down so guess bearing is knackered!

Does anyone know how much lateral movement is normal when pushing/pulling propshaft at centre bearing? Getting dug dug dug sometimes at low speed and suspect bearing on way out

I have a 04 CTT and i finally decided to get rid of the harsh 5th to 4th gear down shifting. I know i'm suppose to replace the old control valve and ECU with a newer version of the valve and ECU, but there is a problem. When the tech tried to put the new parts in he said 2 of the solenoids don't plug in!!!!!!!!!!!!

So did i get the wrong version? the part number i got is 95532503950.

PLEASE HELP ME !!

thanks

Attached instructions may help.

replace_electrohydraulic_control_unit.pdf

Hope it's not the gasket, engine out job to remove heads.

If you mean PSM combination sensor its below centre console (near cup holders)

Hi,

Can anyone tell me where to find ignition switched live feed in dash area of 03 CS.

(fitting parrot ck3100)

many thanks

Thanks again. I will get in toch with my local (Edinburgh) dealer.

Anyone know if its possible/practical to retro fit cruise control to MY2004 Cayenne S ?

Hi

Firing order M 48/01 48/51 V8 = 1-3-7-2-6-5-4-8

Many thanks

Anyone know the firing order on Cayenne S.

Thanks