valcax

Which is the correct position for door-entry guards? (986.551.981.01)

Measures for correct installation.

Best regards.

986.551.981.01 Stainless steel door entry guard with boxster logo

I have bought a set of 986.551.981.01, but I am surprised they don´t cover the whole door entry.

I have seen a carbon door entry guards longer which cover whole door entry (in Ebay)

Are there two different versions?? long and short??? Part number??? :help:

Best regards.

The lid itself is not rounded like your picture.

The lid is slightly botton rounded, I can assure you....

The exact placement is covered here.

Please read archive lid.bmp.

I dont know from where to measure.

Which is the correct position ? (Boxster logo)

1A

1B

2A

2B

Best regards.

Loren, I dont know what you mean, I have found in this web a part number 99664213605AKT......... cd rom. It is a part number from Porsche, not from Navtech.

I am looking for pcm1 8 bits of Portugal.

Best regards. :king:

All the plastic window tops are the same.

The liner first came out for model year 2000 just for the S. Then for model year 2001 the 2.7 also got the liner. The mechanic at my dealer that does all the top replacements showed me the extra part that is needed for the liner but I did not take a picture. I asked if the liner could be retrofitted to a 2.5 and he said yes, with that part. I did not ask for details since I had no personal interest in a liner for my 2.5.

What is "liner"???

How to get an accurate position? I was thinking to use water with soap to adjust position easily, then when dry it wil be fixed.

You can not get the Navigation CDs from Porsche.

In the US you get them from NAVTECH. See the post here.

Porsche sells cd navigation for pcm1 in Spain.

PORTUGAL PCM1 (8 bits) CD SOFTWARE NAVIGATION.

Please confirm this CD navigation exists.

Which part(s)?

Sorry, I think I was wrong when I mentioned "rear spoiler", What I mean is "REAR BUMPER" (Version UE) -No square bores in license plate-

955 044 200 05 FUEL CAP TETHER $6.83 (all prices US Retail as of Dec 2005)

996 006 118 01 WARNING STICKER $2.21

996 201 241 03 Fuel cap with clip $6.84

BTW... As a Contributing Member you do know that you can lookup prices? It should be on your "Online Docs Menu".

I need part number of rear spoiler 986 MY99

Thanks Loren!

955.044.200.05

996.006.118.01

And .. Original boxster black fuel cap ( I don´t know part number)

Regards.

Membership is not upgraded, I can not see TSBs............help!

I dont know how to read TSB, help!!

I have bought the aluminium fuel cap tequipment

It comes with two little plastic round, it must be to hold cap when is taken off. I hope you know what I am talking about... :D

But I dont know when to hold... :help:

I have read in instructions manual there is a bag to keep windshield in winter,

part number? any pic?

Best regards.

Thanks that is a very good info.

How is the adeseive from the old logo best removed?

Will a solvent damage the paint?

Most folks use 3M adhesive remover, a little dental floss and in rare cases a little heat from a hair dryer. Keep the heat away from the 3M adhesive remover!

Where to buy 3M ADHESIVE REMOVER? I cant find it here.

However I found a professional liquid adhesive remover, but I am not sure is suitable because it could damage paint.

http://www.carcareonline.com/detail.asp?product_id=10164

I have bought HG ADHESIVE REMOVER, I just hope it works !! It seems to be similar to 3M ADHESIVE REMOVER. What do you think?

Thanks that is a very good info.

How is the adeseive from the old logo best removed?

Will a solvent damage the paint?

Most folks use 3M adhesive remover, a little dental floss and in rare cases a little heat from a hair dryer. Keep the heat away from the 3M adhesive remover!

Where to buy 3M ADHESIVE REMOVER? I cant find it here.

However I found a professional liquid adhesive remover, but I am not sure is suitable because it could damage paint.

CHROME COLOUR

Part number?

Hi, I am lookin for the best product in the market to get the best look for rear plastic window.

Which to choose, Plexus, Renovo, Meguiars ????

Best regards,

EFR is the older PCM 1 in gloss black (used in MY01 and older)

EWD is the older PCM 1 in mat black (used in MY02 and newer)

<{POST_SNAPBACK}>

Thanks once again! :)

I have seen part numbers on several PCM as 996.642.122.xx EFR, EWD, .... MEANING?

I need to know which disk (or file) is necessary to update version 3.85 to 5.43 when old pcm1 8 bits is replaced by new pcm1 16bits.

That´s all

:cursing:

If you have done a 16 bit upgrade did you not get the disc's that accompany the cd readed - I always understood that to upgrade to 16 from 8  the cd reader would need to be replaced because of the extended memory needed.  I was also of the impression that when obtaining a new cd reader the unit would come with the necessary disc's and that those disks contain the v5.43 software - I did plan on doing the upgrade myself but was put off by the cost. -  I may be wrong though?

RB

Regards.

<{POST_SNAPBACK}>

Any help?

<{POST_SNAPBACK}>

<{POST_SNAPBACK}>

Cd unit reader doesn´t contain with disks.

I need to know which disk (or file) is necessary to update version 3.85 to 5.43 when old pcm1 8 bits is replaced by new pcm1 16bits.

That´s all

:cursing:

Regards.

<{POST_SNAPBACK}>

Any help?