Server Lease Renewal/Software Licenses
Our yearly server lease, software licenses, as well as hardware operating costs, ARE due Dec 6th, 2021. Our current donations have fallen far short of the funds we need to renew. Please remember the RennTech.org community is Member supported so please consider a donation to help... THANK YOU!
Welcome to RennTech.org Community, Guest
Search the Community
Showing results for tags 'head unit'.
Hi, I have recently had to replace the broken PCM unit in my 2007 Cayenne, I chose an AVH-X8800BT Pioneer head unit. I have used the following connectors: https://www.dynamicsounds.co.uk/connects2-ctspo001-porsche-cayenne-2002-stalk-steering-wheel-control-adaptor.html https://www.dynamicsounds.co.uk/connects2-ct27aa25-universal-twin-fakra-to-din-aerial-antenna-adaptor.html https://www.dynamicsounds.co.uk/connects2-ctmultilead-2-universal-steering-wheel-stalk-adaptor-stereo-patch-lead.html?search=CTMULTILEAD.2 Everything works pretty much as expected, apart from the lack of reception. I have hooked up the blue aerial adapter wire to the blue / white wire coming out of the head unit, but it doesn't seem to make a difference at all. The blue white wire has roughly 12v on it when it is unplugged, and I can get a voltage back at the other end of the fakra aerial wires where they plug into the amplifier in the rear spoiler. Does anyone have any clues as to why it doesn't seem to be working? At the rear spoiler it looks like I have two amps, 1 on each side, the right hand amp has EXT, black and curry coloured connectors, the left side just has EXT. Has anyone got any hints as to how I can diagnose this? Just to confirm that the reception was working fine on the old Porsche unit before it died. Thanks Ned
I am going to install a double din head unit into my 2001 986, but i have a wiring question. I was expecting to see 2 connectors at the back of my Beck head unit, which i would match up the correct wires from the wire diagrams i have, BUT on take out my Becker unit i have only 1 connector (power/switched power/antenna control/ground etc) and a yellow connector. This yellow connector has a +LR/RR/LF/RF, a common audio ground and a 12v switched power. Where do these get attached to on my new units ISO? Do i split the common ground 4 times to make it - LR/RR/LF/RF? Why are these speakers switched? What do i do with the 12v switched wire from this connector? I'll be using a 12v switched wire from the first connector already. TIA