Welcome to RennTech.org Community, Guest
There are many great features available to you once you register at RennTech.org
You are free to view posts here, but you must log in to reply to existing posts, or to start your own new topic. Like most online communities, there are costs involved to maintain a site like this - so we encourage our members to donate. All donations go to the costs operating and maintaining this site. We prefer that guests take part in our community and we offer a lot in return to those willing to join our corner of the Porsche world. This site is 99 percent member supported (less than 1 percent comes from advertising) - so please consider an annual donation to keep this site running.
Here are some of the features available - once you register at RennTech.org
- View Classified Ads
- DIY Tutorials
- Porsche TSB Listings (limited)
- VIN Decoder
- Special Offers
-
OBD II P-Codes - Paint Codes
- Registry
- Videos System
- View Reviews
- and get rid of this welcome message
It takes just a few minutes to register, and it's FREE
Contributing Members also get these additional benefits:
(you become a Contributing Member by donating money to the operation of this site)
- No ads - advertisements are removed
- Access the Contributors Only Forum
- Contributing Members Only Downloads
- Send attachments with PMs
- All image/file storage limits are substantially increased for all Contributing Members
- Option Codes Lookup
- VIN Option Lookups (limited)
porschetechnik
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Events
Forums
External Paint Colors
Downloads
Tutorials
Links Directory
Collections
Store
Everything posted by porschetechnik
-
part number needed
porschetechnik replied to zdr2k's topic in 996 Series (Carrera, Carrera 4, Carrera 4S, Targa)
996.537.075.03 Coupe 996.537.076.03 Coupe 996.537.075.04 Cab 996.537.076.04 Cab Kurt -
You will have to drop the engine to remove the oil cooler as the side tin, back tin and air guide have to be removed to remove the cooler. Kurt
-
I would recommend a 10W40 semi syntheic but not a full syntheic oil as your vehicle was never designed to run with those oils. We use Lurbo Moly here in the shop and have found it to work well. Kurt
-
Sounds like you forgot to drain the oil tank.... Start again by draining both the engine oil sump and the oil Tank, let them sit with the drain plugs out for a couple of hours. Then refil the engine with 9qts of oil. The engine is going to smoke when you start it up, don't worry about this as it will clear after 30 to 40 minutes of run time.... You have not caused any other damage and the reason that this happens is that when you overfill the crankcase,the scavage pump can't get rid of the oil back to the tank as it keeps coming back in though the vent hoses, the oil in the crankcase is then hydrulic'ed past the rings into the combustion chamber casuing the smoke. If you need anything else let me know, Kurt
-
Louis, On the 87 carrera the seat belt warning light is controled by the seat belt warning module/relay that is located in the front trunk area, left sides just behind the gas hood strut. Most likely you have a loose contact in the relay or the seat switch that is triggering the relay to turn the light on, or a bad ground connection of which there are three located in the front Trunk. I would check and clean my ground connections first, if there are good I would go to the relay next, pull it out and shake it, if you hear someting rattling around then it is most likley the problem. The relay is tied into the power windows and the intenisve washer system, so if you leave it out those systems will not operate. However the european vehicles do not use the seat belt warning system so you can confirure your car to not use this feture by removing the relay and installing two jump wires in the socket. The first jump wire will go between terminals "L" and "G" and the next wire will jump terminals "86" and "31"..... Hope this helps PS: one last thing; it is also possible that the seat belt warning switch is also defective ethier wy deactivating the system will solve you issue, if you need my help shoot me an email and I will see what I can do Kurt Porschetechnik