Server Lease Renewal/Software Licenses
Our yearly server lease, software licenses, as well as hardware operating costs, ARE due Dec 6th, 2021. Our current donations have fallen far short of the funds we need to renew. Please remember the RennTech.org community is Member supported so please consider a donation to help... THANK YOU!
Welcome to RennTech.org Community, Guest
Search the Community
Showing results for tags '1023'.
First time post... hope to start contributing to the forum now! 09 GTS with 93k and excellent maintenance history, recently getting long cranking times and sometimes rough idle at startup. Starter is working properly so we can rule that out - not sure what to tackle first, coils? fuel pumps? HPFP? Durametric codes: 1023 Ignition Coil D Primary/Secondary circuit - upper limit value exceeded 1026 Fuel high pressure implausible - value below lower limit value The 1023 keeps coming back when cleared but never throws a CEL, the 1026 has been very intermittent but will throw a CEL. I swapped coils 3 and 4 (assuming D is coil 4 and coil 4 is rear-passenger side of engine?) and still get the 1023 code for "D" but no misfire codes. I tried pulling fuses 13 and 14, independently, and truck starts on both fuel pumps (with long crank). Logged with Durametric the fuel setpoint vs. actual pressure and I get 40bar at idle and it seems to keep up OK while driving up to 120bar at WOT. Plugs were changed at 80k but I believe to be on original coils and fuel pumps. So before I start throwing parts at this, any advice on what to troubleshoot next? Still fairly new to the Durametric so anythink I'm missing there with respect to data logging? Cheers, Eric