Welcome to RennTech.org Community, Guest
Search the Community
Showing results for tags 'fiber optic'.
Hello. This is my first time posting as this is my first issue with my 2006 Cayenne S and this is also my first Porsche. The vehicle had an aftermarket radio in it when I purchased it and I changed that radio for another one that supported Apple CarPlay. both units are made by pioneer and after looking at the backs of them it appears to be plug and play. I changed everything out and fired it up and everything was great. No issues or errors and the sound worked fine and calls worked fine. The previous installer used only twisted ends and electrical tape to secure the wiring so I took the wiring apart and used wire nuts to make sure nothing came apart while it was being installed and for longevity. After starting the car back up, I received a brake proportioning fault and an oil pressure fault and it told me workshop fault as well. I pulled fuse 40 as I heard it resets the system and plugged it back in. The brake proportioning fault is gone but the oil pressure fault remains. I double checked my wiring work to make sure that I was not missing anything and nothing had come back apart. Everything is indeed attached and plugged in. Now that I have finished my long-winded story, was this fault caused because I knocked something loose or because I left the fiber optic cabling unplugged for too long. I noticed that there was a red light coming from the input and of the fiber optic cabling a couple of times while I was rewiring it. Do I just need to reset this system using a better method or do you think something is wrong with it? Any help would be appreciated and I intend on donating to this forum and website as it seems to be a true source of knowledge and help for the DIY Porsche enthusiast. Thank you in advance and I look forward to your responses.
I have a 2003 Boxster with the CDR23 radio and external amplifier mounted in the front trunk. There are two multi-pin connectors, a fiber optic connector and an antenna connector on the rear of the head unit. The display on the head unit in the car seems to be fine as the display appears to be working as it should. The problem is no sound out of any speakers. The problem was intermittent for quite a while as sometimes when I started the car I would have sound from the speakers and other times no sound. Sometimes I would be driving and the sound would suddenly just quit. Now there is no sound at all, but the head unit display still appears to be working ok. Does anyone have any suggestions as to what might be the problem?
Hi, I have a 2004 Porsche Cayenne Turbo. After buying the car, I kept getting a error message of "error CD changer not available". I ordered a CD changer from eBay and figured that I could hook it up and be able to get rid of the error message. I have the Bose package with an amplifier, but only one fiber optic cable which is currently going to the amplifier. I took off the entire panel thinking that since it had the error message and CD changer bracket it would have to be in there somewhere, but to no avail. Is there anyway I could use a splitter for the fiber optic cable or even splice into the wires and try to run both off the same cable? Please help! I haven't even put everything back together in fear that I'll have to take it all off again. Thanks!!! P.S. Any link to where I can get the cables I need would be greatly appreciated