Welcome to RennTech.org Community, Guest
Search the Community
Showing results for tags 'removal'.
I'm trying to remove the heater control on my 2002 986, so I can replace the malfunctioning LCD. Since the failure of these older LCDs (the radio has the same issues) is such a common problem, I thought there might be a tutorial here, to review, before I go prying away at the dash. But I haven't been able to find one by doing a simple "Heater Control Removal" search. Can anyone enlighten me with a link or the smoothest removal procedure? Spring is almost here, so I need to fix this for driving! Also looking for the easiest way to replace the partly defective display on the Becker Rad
Hi, i apologise for being a lurker and not really ever posting since i joined; but i have a serious issue right now :^( ive been DIYing most stuff for my car - pioneer nav - footwell lighting - seatbelt replacement - o2 sensor replacement etc etc. but this has me absolutely stumped. a few weeks ago the interior trim / lining of the sun roof came off while the sun roof was open. it basically got stuck above the headliner in the car; so after i closed the sunroof, i wasnt able to ever open it fully again. i tried to tackle this problem today and one problem led to another and this whole
Can anyone tell me how to remove the headlight switch on my 2005 CTT. I read you push in and turn counter clockwise, and it pops out. That does not seem to work. Any thoughts.
Hi all Finally decided to do the clutch. Raised the back of the car and removed plastic covers - all good so far. Then tried to remove the sway bar to fit an engine support brace. The bolts holding the sway bar bushes to the subframe all eventually sheared off - even with WD40, tapping with a hammer and heat. It's really frustrating to hit this kind of problem on step 1 of the process! So now I think the only solution is to remove the subframes and get them to a machine shop to have the bolts drilled out. The manual I have doesn't cover subframe removal. Is there anything to watch o