Welcome to RennTech.org Community, Guest
Search the Community
Showing results for tags 'remove'.
Can I simply remove/pull out the variocam actuator in bank 2 (or bank 1 for that matter) to possibly clean or replace then simply insert back in without doing anything else? I would like to do this to trouble shoot to see if I can get the actuator to engage with Durametric (of course the engine will not be running). If it doesn't engage then I would then move to the the solenoid. I have seen videos where they can be cleaned and start working again however the videos I've seen have the variocam actuator completely taken out and set on a work bench. My concern is if I do this wrong I create a larger problem when inserting back in. Any advice, thoughts, questions or comments? Thanks, John
I'm trying to remove the heater control on my 2002 986, so I can replace the malfunctioning LCD. Since the failure of these older LCDs (the radio has the same issues) is such a common problem, I thought there might be a tutorial here, to review, before I go prying away at the dash. But I haven't been able to find one by doing a simple "Heater Control Removal" search. Can anyone enlighten me with a link or the smoothest removal procedure? Spring is almost here, so I need to fix this for driving! Also looking for the easiest way to replace the partly defective display on the Becker Radio LCD. The 2002 has the security radio with the plug-in display, so at least this is easy to remove. Wondering if anyone has had a successful repair done on their Becker radio display, for less than an arm and a leg? Thanks!