Server Lease Renewal/Software Licenses
Our yearly server lease, software licenses, as well as hardware operating costs, ARE due Dec 6th, 2021. Our current donations have fallen far short of the funds we need to renew. Please remember the RennTech.org community is Member supported so please consider a donation to help... THANK YOU!
Welcome to RennTech.org Community, Guest
Search the Community
Showing results for tags 'control'.
I got a Cayenne and need some help about 2 control buttons on the front roof light control. the center button controls the Interior light, ( ok that is in owners manual ) the far left and far right control Map lights, ( ok that is in owners manual ) and the right and left buttons??? seams one is for comfort light dimmer, and the other one?? one of them are missing in owners manual. Thanks for help!!
I'm trying to remove the heater control on my 2002 986, so I can replace the malfunctioning LCD. Since the failure of these older LCDs (the radio has the same issues) is such a common problem, I thought there might be a tutorial here, to review, before I go prying away at the dash. But I haven't been able to find one by doing a simple "Heater Control Removal" search. Can anyone enlighten me with a link or the smoothest removal procedure? Spring is almost here, so I need to fix this for driving! Also looking for the easiest way to replace the partly defective display on the Becker Radio LCD. The 2002 has the security radio with the plug-in display, so at least this is easy to remove. Wondering if anyone has had a successful repair done on their Becker radio display, for less than an arm and a leg? Thanks!
Hi, I need urgent advice please, I have a Porsche Carrera 4 911 996 2001, water has been found underneath seat where control alarmbox is situated labelled M535, Part Number: 996.618.262.01, and it is quite serious as the water created an electrical fire that melted control unit. The wires seem slightly corroded and the car will not start. Dash lights illuminate and I have disconnect Control Box. The door has a clicking noise and will not open. I understand I need to have control box M535 changed that needs to be coded to new key form but curious as to your thoughts to the following: 1) Cost in replacing with new control unit and wiring loom? 2) How far does the wiring loom run if needs full replacement? Interested in your suggestions and projected cost in fixing the above.