Jump to content

The RennTech.org community is Member supported!  Please consider an ANNUAL donation to help keep this site operating.
Click here to Donate

Welcome to RennTech.org Community, Guest

There are many great features available to you once you register at RennTech.org
You are free to view posts here, but you must log in to reply to existing posts, or to start your own new topic. Like most online communities, there are costs involved to maintain a site like this - so we encourage our members to donate. All donations go to the costs operating and maintaining this site. We prefer that guests take part in our community and we offer a lot in return to those willing to join our corner of the Porsche world. This site is 99 percent member supported (less than 1 percent comes from advertising) - so please consider an annual donation to keep this site running.

Here are some of the features available - once you register at RennTech.org

  • View Classified Ads
  • DIY Tutorials
  • Porsche TSB Listings (limited)
  • VIN Decoder
  • Special Offers
  • OBD II P-Codes
  • Paint Codes
  • Registry
  • Videos System
  • View Reviews
  • and get rid of this welcome message

It takes just a few minutes to register, and it's FREE

Contributing Members also get these additional benefits:
(you become a Contributing Member by donating money to the operation of this site)

  • No ads - advertisements are removed
  • Access the Contributors Only Forum
  • Contributing Members Only Downloads
  • Send attachments with PMs
  • All image/file storage limits are substantially increased for all Contributing Members
  • Option Codes Lookup
  • VIN Option Lookups (limited)

Please help diagnose shifting problems


Recommended Posts

Boxster with 5 speed manual that is new to me, with no available history. Meaning I have no idea when clutch was last replaced.With car on jack stands, and motor off, the tranny will shift into all gears.With car on jack stands, and motor running, the tranny will shift into all gears.With car on the ground, and motor off, the tranny will shift into all gears.With car on the ground, and motor running, the tranny will only go into 3 and 4th (never tried 5th). It will not shift into 1st, 2nd, or reverse.On the road, with only 3rd and 4th, there is no grinding with those two gears, and when I try to find 2 in a downshift, there is no grinding, just won't go into gear. So I thought it was a shifting linkage problem, EXCEPT that it goes into all gears with motor off.Since it finds all gears with the motor off, while on the ground, I believe motor and/or transmission mounts are okay.With car on the ground and motor running, when I try to shift into 1st, 2nd, or reverse, there is no grinding. Oddly enough however, when I tried to shift into reverse to back out of the garage, the car would go back a few inches almost like it was in gear (which it wasn't though it may have been close). Strange.With car on the ground and motor off, put tranny into reverse, depressed clutch and tried to start. Car would not start, but it would roll backwards a few inches as the starter motor was slowly turning the engine. So, I thought it was a clutch problem.Tried bleeding the clutch, no difference (but allow that my method was not the approved pressurize the system)Now, I am not sure what I have. A bad clutch (though no grinding), or bad linkage (though it finds all gears with motor off), or do the mounts change with the motor running (meaning I discounted that item prematurely?)Obviously, I am confused. Can you help?Thanks,Joe

Link to post
Share on other sites
    You can remove these ads by becoming a Contributing Member.

Sounds like your clutch is not completely disengaging even when the clutch pedal is fully depressed. Can you confrim also with car on jack stands, and motor running, the tranny will shift into all gears but the wheels will be spinning even with the clutch fully depressed?

I would pressure bleed the clutch properly first.

Link to post
Share on other sites

Thanks for the reply, you are the first from three different forums. I really appreciate it.

Yes, the wheels do spin even with the clutch fully depressed. Agree that clutch is not fully disengaging. Bleeding is cheaper than replacement, but just for discussion...How would a faulty slave cylinder appear different from my experiences? And, besides the hydralics of the slave cylinder, is there any mechanical part (I'm thinking spring - as in clutch release lever) that could be the issue, and if so, how would I test to pinpoint which problem I have?

Link to post
Share on other sites

You're welcome. Yes, a faulty slave cylinder will cause the exact symptoms and so do other mechanical parts inside like you said. Just start with the simplest, which is bleeding the slave properly to make sure there's no air in it. If that doesn't work, either you throw in a new slave cylinder (and hope that's it) or you remove the transmission to do a full inspection - also a good opportunity to address the IMS/RMS the same time too.

Please refer to the DIY tutorial here for 996. It should be similar http://www.renntech.org/forums/tutorials/article/54-brakeclutch-fluid-change-and-bleeding-instructions/ Make sure you start with the brake fluid at MAX before bleeding and with plenty of brake fluid in the bleeder. The clutch fluid has a seperate (and small) partition inside the reservoir seperated from the brake side and it's easy to "bottom out" if fulid supply is interrupted from the bleeder. If not at MAX, you may inadvertantly introduce air in the clutch side when you bleed. I always use a pressure bleeder (per the DIY) and do not know other reliable ways.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.