Server Lease Renewal/Software Licenses
Our yearly server lease, software licenses, as well as hardware operating costs, ARE due Dec 6th, 2021. Our current donations have fallen far short of the funds we need to renew. Please remember the RennTech.org community is Member supported so please consider a donation to help... THANK YOU!
Welcome to RennTech.org Community, Guest
I have a 2003 Boxster base model (2.7) with auto. Current showing code P0600 and DTE 61. Had a few different Porsche mechanics look at the issue and have not found a solution. Cleaned the electrical connection at the transmission and verified the ground connections at the tiptronic control module. Had the DME, tiptronic module and immobilizer checked and they were found to be working.
Does the Can-bus connection between the DME and the tiptronic module extend to the immobilizer or other modules? All I could find is information up to the 2001 model year.
Looking for a reason why the DME Is not communicating with the tiptronic and how to test the Can-bus circuit. Is there a wiring schematic available for the 2003/2004 boxster?
Hi all 986 guys.
I will post for the first time.
I have '98 986K(Tip-s),Can I swap 5-Speed(or 6-Speed) manual transmission?
In other words, prepare missions, pedals, manual transmission CPUs, etc. like a typical car model (for ex, BMW).
Is it possible to update only the mission, not the upgrade to 3.4L?
Has anyone ever seen or heard of such a vehicle?
I can find 986K 5speed as much as I want, but I want to stick to my one.
Tried googeleing it but couldn’t find what I was after. Was curious if anyone knows what type of flat 6 the 986 boxster has?
Is it a a true boxer engine? Or a horizontally opposed flat V? True boxer meaning it has individual crank pins for each piston and is a true 180degree angle. Thanks in advance
The rear window on my 2001 S has separated from the canvas, and the tan top is dingy and past its prime. I no longer have a garage, so I am forced to outsource it. I would appreciate some informed opinions.
I'm looking at a GAAH A5 Acoustic glass window top. The dealer is saying $2,700-$3k installed. A reputable convertible/interior specialist is coming in at $2,200. The dealer talked about needing to buy additional sound insulation, clips and etc., which is either building in additional profit, or it may be totally justified because they have experience and might provide additional quality. I don't have an excess of cash for a 18 y/o car so I'm soliciting experienced opinions:
Assuming the local top specialist is truly skilled at their game, should I expect that they can handle this, along with connecting the heating element? I doubt they have done many A5 Acoustic glass retrofits, whereas the dealer has likely done a few. If I go with the local specialists, are there some unique things I need to specify they order/replace/pay attention to? Should I give more weight to (a) Porsche dealer that only occasionally does a top or (b) the people who do tops all the time, but just not Porsches?
All informed opinions are welcome.