Welcome to RennTech.org Community, Guest
External Paint Colors
Porsche TSB Listings
Everything posted by JoostE
Just curious; if you are able to add so much extra power and torque to the cars engine, what will that do to other parts of the car like the gearbox, brakes and so on ? Do you upgrade these also ?
I saw a similar problem with noise related with the AC. A quick solution was to fill the system to the max, however that solved the problem only temperarly. In this case both the front radiators were replaced to solve the problem.
JoostE replied to Rennsource's topic in 996 Series (Carrera, Carrera 4, Carrera 4S, Targa)I ve seen 19" inch/ 295mm rims on a C2 making contact with parts of the wheelmount when the springs are fully pressed (rear tires). You should take that into consideration. As I understand for a C2 the max tire size is a 18" with 265mm tires. The 19" did look nice though .....
JoostE posted a topic in 996 Series (Carrera, Carrera 4, Carrera 4S, Targa)As I browsed around the internet, mainly because of items I read on this forum, I was wondering; - how many members have their own durametric software and how often do you use it ? Joost
An update and perhaps for future reference: Allthough the engine was running smoothly, further diagnostics indicated that there is a problem with the variocam. The conclusion of the mechanic was that this part needs to be replaced. With the replacement part there were no more errors in the read-outs. Thanks all for your advise. All the best, Joost
JoostE replied to Paul Grainger's topic in 996 Series (Carrera, Carrera 4, Carrera 4S, Targa)Hi Paul, what was the final conclusion for you car ? Were there problems with the variocam ?
Thanks Iogray for your reply. What was the solution to solve this, was the DME replaced ? Are there other indicators of a malfunction of the variocam besides the read-out at Porsche ? You should be able to read the VarioCam settings on the Durametric software as well. Thx JFP; At the PPI they didn't mention anything about a Durametric readout; I do not own such a kit. It was just written on the report the gave me - I didn't see the actual read-out. As I understand correctly from your answer; variocam errors are only noticable from digital read-outs ? There are no other indicators ?
With a good service record history, the car should be sound. To swap out the VarioCam unit or solenoid, it requires special tools (cam holding device) and removal of the cam cover on the side with the fault. This is not a difficult procedure, but it is a bit time consuming. As I do not have access to your local parts pricing, I would suggest asking your dealer's part department for pricing on both the VarioCam actuator and solenoid to get an accurate assessment of what it is going to cost. Thanks again for your reply. Before the check this week, the car was checked and some repairs were m
Thanks Iogray for your reply. What was the solution to solve this, was the DME replaced ? Are there other indicators of a malfunction of the variocam besides the read-out at Porsche ?
Thanks JFP for your answer. I had the 996 checked by Porsche this week, they told me about this as a read out of the on-board computer. The car is in very good shape, both interior and exterior. There is no light on the dashboard blinking. The history of the car is available, it has been checked on a regular base. The oil has been changed recently. In the Netherlands they keep track of every (recent) cars; the kilometers a car has driven is stored central when it is being serviced. Only in the early years of the car a lot of kilometers were driven with it. The last two/ three years only 1.20
Thx boxter-s-dk for your reply. Are errors concerning the variocam such a serious issue that you would advise me not to buy this particular car ? Porsche indicates this as 'an active error in the variocam system' when I had the car checked for their advise. The car is driving fine for all I can see. Can this be a software error, or does it have something to do with the electronics, or perhaps a mechanical problem ? The car is from 07 '98, it has manual gear box and it has driven 101.000 km.
Hi, I'm new to this forum and would like to discuss a subject concerning the variocam in a '98 C2 996. I want to buy this car, the only issue is that the onboard computer shows an error/ report concerning the variocam. I had the car checked at Porsche, they told me about this. The engine is running fine and there are no other problems with the car. Is it safe to buy this car, or should I have the seller to check/ repair the error ? The seller is providing a 3 month warrenty, but I won't use the car on a daily base. What would you advise me to do ? Joost