Welcome to RennTech.org Community, Guest
Search the Community
Showing results for tags '2012'.
hello , i want to replace the brake pads on front and rear of my Cayenne 958 diesel 6/2012 Whit the black calipers , i have already order the parts , but i have some questions , The front calipers bolted whit to big bolts part number WHT 004 571 they told me to renew them to , but how tight do a have to fastened these bolts in newton . also the rear main caliper bolts needs to be replaced part number N 911 837 01 how tight must these ? but i cant find out how to chance those rear pads , the car have also electronic parking brakes but someone tels me that the car needs on the diagnose computer to chanche the rear pads (aka VW ) , but i find this strange , i tested wit a piece of paper between pad and disc and activate the parking brake result the paper was not holding tight between pad and disc and feld down. because of this i think there are internal brake shoes inside the disc is this correct ? any technical help whil be helpful thanks in advance . or any exploded view .pdf part numbers : front pads 958 351 939 , warn contact 958 612 356 00 , caliper clips 970 351 959 00 Bolt front caliper WHT 004 571 , Rear Pads 958 352 939 00 , bolt N 911 837 01 , caliper clips 7PP 615 269 , warn contact 958 612 365 50 see pictures
2012 Base boxster with Bose sound. Had the passenger side drain clog, with resultant water under the passenger side seat. Part of the collateral damage is now no sound from any source, i.e Radio, Aux, CD or Phone. The radio works as far as I can tell. I understand that the amp in this MY is located under the passenger seat. When I moved the seat forward to squeegee out the water, I noticed what appeared to be a slight burn mark on the carpet near the rear right hand seat rail. So, is this possibly a fuse on the stock Bose amp? If so, what type? I imagine I will have to pull the seat to get to it, but I also think there is an airbag cable\sensor there, so don't want to turn that idiot light on. If I have to go the route of replacing the amp, what specs hsould I be looking for, as far as wiring, etc? All advice welcome. Thanks in advance!