Server Lease Renewal/Software Licenses
Our yearly server lease, software licenses, as well as hardware operating costs, ARE due Dec 6th, 2021. Our current donations have fallen far short of the funds we need to renew. Please remember the RennTech.org community is Member supported so please consider a donation to help... THANK YOU!
Welcome to RennTech.org Community, Guest
Search the Community
Showing results for tags 'window drop'.
I recently purchased a 2006 C4S Cabriolet m/t US Model and since my ownership I have been unable to lock the car via the remote and the driver side window does not automatically fully close. I replaced the latch assembly hoping it would knock out one or both problems but nothing has been resolved. Fuses look ok to me. Below is further detail and Durametric codes -- is there anything in there that points to likely culprit(s)? Appreciate your help! Door will not lock with remote (double beep) or with key. I am able to use emergency procedure to lock door (turn key three times) The doors will lock if I hit the locking button inside car. The remote unlocks the car fine. FIXED: Driver Side Door Control Unit/Motor Driver side window drops the 10mm or so when opening door but does not go back up upon closing door. If I am in the car I can manually roll up the last 10mm and it will stay up until I touch the handle again. If the door is open and I roll up all the way it drops the 10mm instantly. Passenger side works as expected. FIXED: Driver Side Door Control Unit/Motor: Interior lights stay on. Potentially unrelated issues/info but will mention just in case FIXED: Rear Control Unit was set to Boxster, updated to 997 cabConvertible top when closing will cycle through latching and never stops, but does latch but I have to let go of button. Rear right window at times does not close on first try FIXED: Rear Control Unit was set to Boxster, updated to 997 cabSpoiler button does not do anything but spoiler can be activated w/ Durametric AWS module can not be found (I disabled in other modules) Aftermarket radio is installed Codes on durametric Left Door (driver side): FIXED: Driver Side Door Control Unit/Motor:8026: Control unit faulty (does not clear) 8003: Door entry light ( temporarily clears) FIXED: Driver Side Door Control Unit/Motor:8009: Door H. button, inner sh. stroke (temporarily clears) FIXED: Rear Control Unit was set to Boxster, updated to 997 cab:C174: Fault convertible top control unit (comfort) (temporarily clears) Right Door (passenger) 8003 Door entry light ( temporarily clears) FIXED: Rear Control Unit was set to Boxster, updated to 997 cabC174: Fault convertible top control unit (comfort) (temporarily clears) Alarm 8004: Terminal 50 (Does not clear) 8005: Terminal S (temporarily clears) Front Body Module 8021: Front luggage compartment light (does not clear, currently unplugged) 8042: Front luggage compartment unlocking (occasional) Convertible Top 8041: Right rear window lifter (temporarily clears) Seat Memory C102: Single-wire operation "comfort" (does not clear) Various modules: Airbag, Gateway, Instrument C141: Communication PCM (display)
2003 996 cabriolet. I was putting my top up yesterday and I heard a strange noise as it was finishing putting up the windows. The sound was almost like a popping sound (not very loud). I went to open the door (drivers side) and the window did not drop. I tried the outside handle and the inside handle and no drop. The window goes up and down fine. I have done a search and read several great write ups on micro switches and regulators, I am still a little stumped on this one. Is it a micro switch issue or possibly an issue with the top controller. I did not have a chance to investigate or troubleshoot because I had to go on a work trip. Anyone else have a similar issue? Any thoughts on this would be appreciated.