Welcome to RennTech.org Community, Guest
By Amber Wells
I have a 97' tip Boxster with a blown front seal and unfortunately, I broke the clutch basket on the axle while trying to remove it from the case (**** YouTube tutorials, didn't think it through). I was planning on replacing the bushing and seal with the oversized one and getting my oil pump machined so that the bushing would fit.... But now I have broken even more parts in my attempts to fix it.
SO! I have a parts car that is a 98' manual Boxster. How realistic is a conversion from tip to manual? I would be doing it with the help of a few friends.
I have a 2003 Boxster base model (2.7) with auto. Current showing code P0600 and DTE 61. Had a few different Porsche mechanics look at the issue and have not found a solution. Cleaned the electrical connection at the transmission and verified the ground connections at the tiptronic control module. Had the DME, tiptronic module and immobilizer checked and they were found to be working.
Does the Can-bus connection between the DME and the tiptronic module extend to the immobilizer or other modules? All I could find is information up to the 2001 model year.
Looking for a reason why the DME Is not communicating with the tiptronic and how to test the Can-bus circuit. Is there a wiring schematic available for the 2003/2004 boxster?
1999 986 2.5 Boxster. (5 spd)
Not many problems with the car but cruise control doesn’t work and the spoiler only extends halfway or so.
Current actual problem with the car is that I can feel vibration or shaking in the steering wheel (and in the car to a much lesser extent) after shifting into fourth gear. After shifting into fourth gear, the shaking seems to persist even as I slow down, or after shifting into fifth. It will persist even if I shift into neutral but will stop after I come to a stop.
It’s strange to me that this is the case when gears 1-3 don’t have this problem. I am guessing that it’s an issue with bearings or alignment in the front wheels since i’m feeling the vibrations in the wheel but hopefully someone here has a better idea.
Tried googeleing it but couldn’t find what I was after. Was curious if anyone knows what type of flat 6 the 986 boxster has?
Is it a a true boxer engine? Or a horizontally opposed flat V? True boxer meaning it has individual crank pins for each piston and is a true 180degree angle. Thanks in advance