Server Lease Renewal/Software Licenses
Our yearly server lease, software licenses, as well as hardware operating costs, ARE due Dec 6th, 2021. Our current donations have fallen far short of the funds we need to renew. Please remember the RennTech.org community is Member supported so please consider a donation to help... THANK YOU!
Welcome to RennTech.org Community, Guest
Does anyone know how to disassemble the Lucas Master Cylinder installed on a 2002 996 C4
I have removed the large circlip and the cotter pin, but can't get the piston out even with pulling.
There is a plastic cover at the back of the cylinder which looks like it is a push fit, but this doesn't want to move and is quite brittle plastic so I don't want to break it. This could be threaded and therefore needs to be unscrewed to remove, but there are no lugs or holes which could be used with a tool to enable it to be turned.
Grateful for any advice.
So I have a 2011 Cayenne S. I took it on a road trip in July and did over 6000kms pulling my 19ft travel trailer. No issues pulling it at all, quite the opposite. The pig performed like a champ! Now I'm home and commuting back and forth to work and I start hearing a sporadic whining noise. Sounds like gear/tranny/transfer case noise. it comes and goes. there is no grinding sounds or anything like that just a whining. I'm wondering if she burned through some fluid during her hauling roadtrip? Would low fluid levels cause whining?
Thanks in advance!
I was troubleshooting code P2189, undo some vacuum line to test for leaks ... this is a different issue all together. I mentioned it because I unhooked vacuum lines. I reconnected everything (hoses), I did not start the engine because I was still working on it. My engine was running fine for weeks even with P2189 - not rough like some mentioned!
Two days later, In the morning, I used the car to do errands, I drove for about 10 minutes. At the stop sign, I stepped on the brake, the car won't stop like it used to! It rolled slowly and then stopped. It's like taking a much much longer distant to stop. I did not see anything abnormal on the dashboard except for the CE for the P2189 code! no smell of anything. I continued to drive the car at the normal speed (35 mile/hr) but kept a large distance from the car in front. About 10 minutes later, the brake felt normal like nothing had happened. I drove for another 10 minutes to reach my destination. 2 hours later, jumped in the car to drive home, the brakes felt normal. About 2 minutes the PSM light came on, brakes are still OK. 5 minutes later I pulled into the bank, turned off the engine for couple minutes then restarted the engine, the PSM light is OFF, the brake is normal... I drove home.
Now, where do I start troubleshoot the brakes and the PSM light? I don't have the Durametric tool. Or must I have the Durametric to troubleshoot? can I rent one from someone?
Your help is needed.
Thank you in advance for your assistance.
I am a member of the PCA and have changed brake pads numerous times on 5 different 911's totaling more than I can count on both hands. Does anyone know what the part numbers are for doing a break change (pads, rotors, sensors) on a 2008 Cayenne S
Hey guys new member here. Recently bought my 2000 Porsche Boxster S back in June and ran through plenty of problems since day 1 but today im a little lost. After a failed oil cooler, oil pump solenoid, new spark plugs, new window regulator, new AOS; im now stuck with a knock coming from from the driver side of the engine (U.S.) I haven't needed to get into the engine since I haven't had serious problems until now. Looking at similar knocks on YouTube, I think its a failed rod bearing. CEL came on for a Cylinder 6 misfire. I read at other posts about getting to them through the oil pan but can't find how. Besides pulling the oil pan, what else do I need to crack open? Do I need to remove the cross bar? By the way, I know something is going on because I pulled the oil pan off already and found alot more metallic flakes from wear and tear than usual. Im pretty sure the previous owner didn't do a oil change when he was supposed to. At this point, Im going to college with 5 classes and launching a business soon, so I hope im not stuck with a major rebuild. Planning to post pictures and video tomorrow. Thanks.