Jump to content

The RennTech.org community is Member supported!  Please consider an ANNUAL donation to help keep this site operating.
Click here to Donate

Welcome to RennTech.org Community, Guest

There are many great features available to you once you register at RennTech.org
You are free to view posts here, but you must log in to reply to existing posts, or to start your own new topic. Like most online communities, there are costs involved to maintain a site like this - so we encourage our members to donate. All donations go to the costs operating and maintaining this site. We prefer that guests take part in our community and we offer a lot in return to those willing to join our corner of the Porsche world. This site is 99 percent member supported (less than 1 percent comes from advertising) - so please consider an annual donation to keep this site running.

Here are some of the features available - once you register at RennTech.org

  • View Classified Ads
  • DIY Tutorials
  • Porsche TSB Listings (limited)
  • VIN Decoder
  • Special Offers
  • OBD II P-Codes
  • Paint Codes
  • Registry
  • Videos System
  • View Reviews
  • and get rid of this welcome message

It takes just a few minutes to register, and it's FREE

Contributing Members also get these additional benefits:
(you become a Contributing Member by donating money to the operation of this site)

  • No ads - advertisements are removed
  • Access the Contributors Only Forum
  • Contributing Members Only Downloads
  • Send attachments with PMs
  • All image/file storage limits are substantially increased for all Contributing Members
  • Option Codes Lookup
  • VIN Option Lookups (limited)

Recommended Posts

Hello Everyone,


I currently own a 2010 Porsche Cayenne Base model that has no trailer hitch and I was wondering is the Hitch for the 2007-2010 Audi Q7 or VW Touareg interchangeable with the Cayenne's? Its hard to find a used OEM Cayenne Hitch but I can find plenty of VW and Audi ones and at a better price. Any input would help. Thanks in advance.





Link to post
Share on other sites
    You can remove these ads by becoming a Contributing Member.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By breale01
      7 to 4 pin trailer light adapter for 2013 Cayenne diesel.
      Also, is there a Porsche ball and ball mount? If not, any idea on recommended 'drop' for the mount?
    • By TyS
      I just finished installing a factory tow package on my 2009 Cayenne.  When I hook up to a trailer and test, everything works except for brake lights.  I checked for power at pins 3&9 on the 7-pin and only have power present there with blinker and not brakes.  I've check all fuses related to the tow package (1,3,5,19,&41) and all are good.  I tested the trailer on another vehicle and the brake lights work.  Since I don't have power to those pins, the issue has to be with the Cayenne.  Do I need to have the computer flashed if I am not using electric brakes?  The trailer I will be hooking up to has surge brakes, so I didn't think I needed to visit the dealer.
      Any assist would be greatly appreciated!!!
      Not sure if it makes a difference, but when I purchased this car, it had a Curt hitch with a flat blade connector in the back compartment.  I didn't trace out and remove this wiring, only the hitch.
    • By harmonix
      I bought my 2011 Cayenne S Tiptronic with the trailer hitch pre-installed.
      What else do I need so that I can tow a trailer?
      In these forums I found a suggestion to stay with the Porsche hardware because after-market hitches cannot take full advantage of the towing capacity of this vehicle.
      Contacted the parts department at my dealer and was told there is no Porsche part for this.
      Further, that I could get the wiring connector from the Audi dealer, and the trailer people would set me up with the right ball carrier and ball for my trailer.
      Something does not sound right - I asked the wrong question or received an incorrect answer.
      I do not have a trailer and the idea was to have a set-up just in case a need came up, including helping somebody who might be stuck somewhere.
      Suggestions? Thanks!
    • By bella1
      Recently purchased a 2012 Cayenne 6 cylinder with roof racks but no hitch. Full retail at local Porsche dealer for the hitch is $1200 and likely better deal at Suncoast. Is this a DIY project or Dealer Installed project.? Is there a TSB on this install? I did a quick search here with no luck. Thanks for any input.

    • By seabass
      I just finished installing a Prodigy Brake Controller today on a 2008 Cayenne. I found a couple of write ups that were helpful but not completely clear.
      First off if you have a Trailing Hitch installed on your Cayenne you also have a factory trailer wiring harness for a 7 pin connector. By the hitch, there is a blank plastic piece that needs to be removed and replaced with a 7 pin connector. You can get this connector from your Porsche Parts department, Part PNA-955-118-93,it was $30 CND so it will be like $2 in the US.

      Now if you don't want a brake controller just buy a 7pin to 4 pin converter and you are done. Running lights, Brake Lights and Turn signals will all be working.
      If you do want the brake controller, you need to build a harness. There is a pretty good write up from Tekonsha on how to make the harness for reference. http://www.macscheck...scheCayenne.pdf However what they do not mention is the newer Cayenne's do not have brake switch with a red/black wire, it has been moved into the engine bay. So you will have to make use of the brake signal in the factory 4 pin connector. Which in the end is just as simple, so lets start.
      Likely 10" of wire.
      A bunch of squeeze on connectors if you can't soldier like me.
      A 20A 12V micro breaker
      A 20A/30A 12 4-5 pin relay, from an auto parts store (this will be labelled with pins 85,86,87,87a(not used) and 30.)
      The VW connector, 1J0972782 and 2 VW connector wires 000979228
      I believe all of these parts was about $70 with the connector wires being the most expensive.
      The objective is to take the 4 pin factory connection under the dash and prep it for the Prodigy controller. For the most part this is direct connection.
      1. Take the VW wires 000979228 and cut them in half so you end up with 4 wires with a connector on each end.
      2. Insert all 4 of the wires into the VW connector 1J0972782. On the connector there are numbers 1 to 4.
      3. Start with connector wire 1 which is the vehicle ground. You need to end up with two grounds, one for the prodigy harness (white) and one for the relay pin 85. To achieve the two wires, I used a marrette, twist the connector wire 1, the prodigy harness white, and 5 inches of other wire into one Marrette. Connect the new wire you added to pin 85 on the relay.
      4. Take connector wire 2 which is the vehicle 12V, run it to the 20A 12V micro breaker, off the other side of the micro breaker use another Marette and bring in the 12V out of the micro breaker, the black wire from the Prodigy harness and 5 inches of other wire. Run the 5 inches of other wire to pin 30 on the relay.
      5a. Take connector wire 3 which is the vehicle brake signal. Run is wire directly to pin 86 on the relay. What you are doing is converting the brake signal to a constant 12v signal that the Prodigy will understand.
      5b. To finish up this, connect the red wire from the Prodigy harness to pin 87 on the relay.
      6. Take connector wire 4 which is the vehicle output to the trailer electric brakes. Connect wire 4 directly with the blue wire on the Prodigy harness.
      You should end up with something that looks like this.

      A few shots of the parts:
      The relay

      The Micro Breaker

      The VW connector

      The Prodigy connector

      The final CTT harness for any model year as far as I can tell.

      So all you do is plug the harness in and connect the other end to the Prodigy. These pictures are were taken from some other peoples posts. Remove the lower plastic cover above the brake and gas pedal. One torx screw.

      Look straight up on the left hand side and find the factory 4 pin trailer connector. It is inside a little grey cover exactly as shown below.

      Plug the harness into the factory plug and test. Use a few zip ties to hold everything in place.
      Test your harness without the Prodigy hooked up, you should have 12v between white and black on the harness. When you apply the brake you should have 12v between the while and red.
      If everything checks out, put the plastic cover back on and mount your controller. The final test before hooking it up, is checking that pin 1 to 2 on the rear 7 pin connector gives you a voltage output when applying the brakes.
      I hope that helps someone doing this simple install, the dealer quoted me $600 plus parts to do the same job, so I am happy with the result of doing it myself.
      Happy towing.
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.