microencapsulated bolts

[tony z 0]

Hi

 

Can loctite or a similar  compound be used on bolts 9921800501 and 90007548601.....I have been told Loctite 243 or 260 is suitable but I just wanted to check.

 

thanks

[tony z 0]

sorry I meant loctite 243 or 263

[JFP in PA 641]

17 minutes ago, tony z said:

sorry I meant loctite 243 or 263

 

I would only use 263 on fasteners I was never going to remove again, 243 would be a better choice.

[tony z 0]

Thanks....I meant to note that I intend to reuse the old bolts and just apply loctite .....is that Ok to do ?.. The bolts are the  ones that attach to the crankshaft carrier to hold the chain guide and black plastic oil separato

 

thanks

[Ahsai 161]

I used the 243 (medium strength and can be loosen by hand tools) on the reused bolts when I rebuilt my m96. As long as those are not torqued to yield (torque + angle), it should be OK to reuse. 263 is the red threadlocker that will require applying heat to loosen. Should not be needed for m96 rebuild.

[tony z 0]

Thanks. for that. I shall proceed as you recommend unless someone else has a contrary view !

 

cheers

[tony z 0]

Hi again

 

When I asked this forum about their recommendations I had already logged a message with Pelican Parts on the micro encapsulated bolt issue. 

 

I was more than happy with the two responses I received from this forum. For that many thanks.

 

I wish I had not asked Pelican !!. They just came back to me saying;

 

....... Best practice is to replace them with new microencapsulated ones. None of us have enough experience with reusing them to make a solid recommendation. 

 

I intend to take your technical advice but thought you should know what Pelican had to say. . 

 

cheers
 

[Ahsai 161]

Well, they sell parts and don't rebuild engines so I would not hold my bar too high ?

[JTT 3]

I'd trust Ahsai on this one.  There are some that would have you do a lot of excessive things.  "Best practice" would be to never reuse any fastener, but it's impractical for all but factory race teams.

[tony z 0]

Yes I agree !!