Welcome to RennTech.org Community, Guest
Hi cayenne 04 CTT weirdness the below list of functions was intermittent now nothing works
buttons on steering wheel
tiptromic button on steering wheel
pin out adjustment
all functionality on the steering wheel except it steers perfectly all fuses are good errors as attached any ideas was intermittent
I am wiring indicators, horn and brights (for flash) to an OMP steering wheel hub with buttons to my 2012 997.2 GTS. I need the wire diagram of the indicators and brights on the steering column so I know which wires to tap (horn is done already).
Does anyone have this diagram or know where I can find it?
Edit: Looks like i need the wire diagram for these two specific parts,1 and 3 in the embedded image. 3 is the switch would probably be the one I want. 1 is the control unit and would be helpful to have but redundant if I have 3 and I probably need 3 anyway in order to test any wiring done on 1.
My 2002 996 coupe has a squeaking passenger seat when I push/pull the top or back part of the seat, including driving over bumps. I have half powered seats,,, the top/back is powered while the lower seat assembly is manual. The squeak happens when the top/back is in any position including up so you can access the back seats.
Something must be loose, but my question is if there are any DIY instructions that I could focus on instead of trying to tighten every bolt and hex screw that I can access. It's pretty compact down there...
Thank you in advance
The vehicle is a 2005 997 Carrera 3.6. I cannot find the part #'s for the 3 power steering pump mounting bolts. They are exposed after removing the power steering pump pulley. In the attached picture you will see 3 holes in an upside down U shape behind the triangular pulley mount. I tried my local dealer without any luck.